Used Mares Epic ADJ 82X Regulator
In stock — ships from Irvine, CA
Used Mares Epic ADJ 82X Regulator - Like New / DIN is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at 23D
You May Need These
Condition Note
- Open Box: Generally unused, returned from a customer, with minor blemishes that are not noticeable. Original packaging may be damaged or missing.
- Like New: May be slightly used but looks almost new, with minor blemishes that are not noticeable. Original packaging may be damaged or missing.
- Very Good: Shows signs of use with a few more blemishes. Original packaging may be damaged or missing.
- Good: Shows more signs of use with noticeable blemishes. Original packaging may be damaged or missing.
- Acceptable: Heavily used with more blemishes. Original packaging may be damaged or missing.
Description
Description
The Epic 82X scuba diving regulator combines the traditional advantages of Mares regulators with the latest technological innovations and exclusive design. The regulator features a first stage with an always dry rotating turret and a state-of-the-art second stage with the Twin Power system.
First StageThe first stage of the Epic Adj 82X has a 360° rotating turret. The special design of the HP outlets (OPD) allows the high-pressure hose and/or computer transmitter to be pre-oriented at all times, regardless of the position of the first stage, offering maximum comfort.
The 82X is a balanced membrane first stage. Thanks to these features, it always guarantees top performance and reliability at any depth and with any supply pressure. A careful study of the flows has made it possible to optimise the internal air passages that guarantee a natural DFC, obtaining high air flows on all the low pressure outlets.
The new AST (Auto-Sealing Technology) anti-flooding system is incorporated as standard in the 82X first stage: the system is automatically activated by the gas flow without any mechanical solution for maximum reliability and creates anti-flooding protection that keeps the first stage dry in all conditions.
The forging process used to make the body results in a compact, lightweight and attractive looking product, making the Epic Adj 82X's first stage unique. It is available with an INT or DIN connection.
Second StageThe second stage of the Epic Adj 82X diving regulator was designed by Mares to be the absolute top of the line. The VAD system exploits the Venturi effect by conveying 90% of the air inside a side by-pass. The airflow passes through it without encountering any levers and/or mechanisms, ensuring maximum performance even in extreme situations, such as diving in cold water.
The Twin Power System allows the VAD system's air flow to be controlled, ensuring natural breathing at any depth and providing the necessary amount of air in relation to the diver's demand.
Breathing comfort is adjustable according to the diver's needs thanks to a knob, which is easy to use even with thick gloves; a feature that Mares also applies to the purge button, which is large and pivoting, for easy and immediate use. Pneumatic balancing completes the list of advantages of this second stage.
Specifics
Features
Features
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
