Tusa Tina TC1 Pink Diving Package
Tusa Tina TC1 Pink Diving Package - Black / 2XS (2X-Small) is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at In Store
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The TUSA Tina TC1 Diving Package is a complete scuba setup for women divers, combining the Tina BCD (BC0403B), the TC1 wrist dive computer (IQ1301), the RS1001 balanced diaphragm regulator, the SS0001 Safe Second octopus and the SCA-270 analog pressure gauge and compass console.
Who it is for
This package is built around the Tina BCD, which uses a high-cut waist to reduce interference from lead weights and quick-drying shoulder and back padding for added cushioning. It suits a diver who wants a matched set of core life-support gear, a BCD, regulator, octopus, computer and console, sized specifically for a woman's build, rather than assembling each piece separately.
Key details
- Tina BCD: 500D CORDURA exterior, 420D nylon interior, 3 dump valves (O.P.E.V. plus 2), 2 stainless and 4 resin D-rings, and the A.W.L.S. III weight-loading system.
- Tina BCD lift capacity: 22.5 lbf (XXS), 24.7 lbf (XS), 29.2 lbf (S), 36.0 lbf (M), 36.0 lbf (L).
- TC1 wrist computer: rechargeable LI-ION battery, Buhlmann ZHL-16C algorithm, and Scuba, Plan, Free diving and Gauge modes.
- RS1001 regulator: R1000 balanced diaphragm first stage with 2 HP and 4 LP ports (2 standard, 2 high-flow, roughly 15% more flow), S0001 second stage, usable below 50°F/10°C and tested to 39°F/4°C.
- SS0001 Safe Second: lightweight composite case, left or right hand configuration, venturi adjustment lever, and ortho-conscious mouthpiece.
- SCA-270 console: 5000 psi/400 bar pressure gauge, built-in compass with top and side view, and a luminescent dial.
Compatibility and sizing
The Tina BCD is offered in sizes 2XS through L and is compatible with the TUSA Duo Air II integrated second stage/power inflator. The RS1001 first stage is also available in a DIN version rated to 300 bar/4350 psi.
What's in the box
- Tina BCD (BC0403B)
- TC1 wrist dive computer (IQ1301)
- RS1001 regulator, first stage and S0001 second stage
- SS0001 Safe Second octopus
- SCA-270 analog pressure gauge and compass console
- Roller Mesh bag
DiveCatalog.com is an authorized TUSA dealer and a dive shop in Irvine, California since 2003, so call 888-701-4017 or chat with us if you have fit or compatibility questions about this package.
- High-cut waist: the Tina BCD's high-cut waist design reduces interference from lead weights.
- Comfort padding: quick-drying shoulder and back pads with enhanced cushioning.
- A.W.L.S. III weight system: the Tina BCD uses TUSA's A.W.L.S. III Advanced Weight Loading System.
- Duo Air II compatible: the Tina BCD works with the TUSA Duo Air II integrated second stage and power inflator.
- Rechargeable TC1 computer: the IQ1301 wrist computer runs on a rechargeable LI-ION battery and the Buhlmann ZHL-16C algorithm.
- Four dive modes: the TC1 supports Scuba, Plan, Free diving and Gauge modes.
- Balanced diaphragm first stage: the RS1001's R1000 first stage has 2 HP ports and 4 LP ports, two of them high-flow for roughly 15% more output.
- Cold water rated: the RS1001 is usable below 50°F/10°C and tested to 39°F/4°C.
- SS0001 Safe Second octopus: lightweight composite case with a venturi adjustment lever and ortho-conscious mouthpiece.
- SCA-270 console: combines a 5000 psi/400 bar pressure gauge with a top and side view compass and luminescent dial.
- Roller Mesh bag included: a free roller mesh bag ships with the package for transporting and organizing gear.
| Tina BCD model | BC0403B |
| Tina BCD external fabric | 500D CORDURA |
| Tina BCD internal fabric | 420D Nylon |
| Tina BCD dump valves | 3 (O.P.E.V. plus 2) |
| Tina BCD D-rings | 2 stainless, 4 resin |
| Tina BCD lift capacity (XXS/XS/S/M/L) | 22.5 lbf / 24.7 lbf / 29.2 lbf / 36.0 lbf / 36.0 lbf |
| Tina BCD sizes | 2XS, XS, S, M, L |
| TC1 computer model | IQ1301 |
| TC1 battery | Rechargeable LI-ION |
| TC1 algorithm | Buhlmann ZHL-16C |
| TC1 modes | Scuba, Plan, Free diving, Gauge |
| TC1 colors | Black (BK), White (W) |
| RS1001 first stage | R1000, balanced diaphragm |
| RS1001 ports | 2 HP, 4 LP (2 standard, 2 high-flow) |
| RS1001 cold water rating | Usable below 50°F/10°C, tested to 39°F/4°C |
| RS1001 DIN version | 300 bar/4350 psi |
| RS1001 second stage | S0001 |
| SS0001 colors | Clear, Yellow |
| SCA-270 pressure gauge range | 5000 psi/400 bar (4350 psi/300 bar max) |
| SCA-270 depth gauge range | 200 ft/60 m |
| SCA-270 dimensions | 6.9 in x 2.8 in (175 mm x 70 mm) |
- Tina BCD (BC0403B)
- TC1 wrist dive computer (IQ1301)
- RS1001 regulator, first stage and S0001 second stage
- SS0001 Safe Second octopus
- SCA-270 analog pressure gauge and compass console
- Roller Mesh bag
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How should a scuba BCD fit?
A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.
How do I rinse and care for a BCD after diving?
Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.
Should I use integrated weights or a weight belt?
Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.
How do I pack a BCD for travel?
Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.
When does a BCD need to be serviced?
Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.
What is the difference between a jacket-style and a back-inflate BCD?
A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.
Will my BCD fit any scuba tank?
Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.
What is included in the TUSA Tina TC1 Diving Package?
The package includes the Tina BCD (BC0403B), the TC1 wrist dive computer (IQ1301), the RS1001 regulator with its R1000 first stage and S0001 second stage, the SS0001 Safe Second octopus, the SCA-270 pressure gauge and compass console, and a free Roller Mesh bag for gear transport.
Is the RS1001 regulator in this package available with a DIN fitting?
Yes, TUSA offers an RS1001 DIN version rated to 300 bar/4350 psi. Confirm which first-stage fitting this package includes before ordering if you need DIN.
Does the TC1 dive computer use a disposable battery?
No, the TC1 (IQ1301) uses a rechargeable LI-ION battery rather than a user-replaceable disposable cell. It runs the Buhlmann ZHL-16C algorithm and supports Scuba, Plan, Free diving and Gauge modes.
What sizes does the Tina BCD in this package come in, and does lift capacity change by size?
The Tina BCD is offered in sizes 2XS, XS, S, M and L, and lift capacity increases with size: 22.5 lbf in XXS, 24.7 lbf in XS, 29.2 lbf in S, and 36.0 lbf in both M and L.













