Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Tusa Tina TC1 Diving Package bundles five essential pieces of scuba gear: the Tina BCD (BC0403B), a women's buoyancy compensator with a high-cut waist and A.W.L.S. III weight system; the TC1 wrist dive computer (IQ1301) with a rechargeable LI-ION battery and Buhlmann ZHL-16C algorithm; the RS1001 balanced diaphragm regulator; the SS0001 Safe Second octopus; and the SCA-270 analog SPG and compass console.
Who it is for
This package is built around the Tina BCD's women's-specific cut, which uses a high-cut waist to reduce discomfort from lead weight, plus the Independent Harness System (I.H.S.), Ultimate Stabilizing Harness (U.S.H.), and Waist Support System (W.S.S.) for a supportive fit. It suits a diver who wants a complete, matched set of core gear, from buoyancy control through dive computer, regulator, backup second stage, and gauge console, in one purchase.
Key details
- Tina BCD: 500D CORDURA exterior, 420D Nylon interior, 3 dump valves (O.P.E.V. plus 2), 2 stainless and 4 resin D-rings, and lift capacity from 22.5 lbf (XXS) up to 36.0 lbf (M/L).
- TC1 dive computer: rechargeable LI-ION battery, Buhlmann ZHL-16C algorithm, and Scuba, Plan, Free diving, and Gauge modes with audio/visual and vibration alarms.
- RS1001 regulator: balanced diaphragm R1000 first stage with 2 high-pressure and 4 low-pressure ports (2 standard, 2 high-flow for approximately a 15% increase in LP flow), rated for use below 50°F/10°C and tested to 39°F/4°C; a RS1001 DIN version rated to 300 bar/4350 psi is also made by Tusa.
- SS0001 Safe Second: lightweight composite case, left or right hand configuration, venturi adjustment lever, and classic downstream valve with purge button.
- SCA-270 console: 5000 psi/400 bar pressure gauge (4350 psi/300 bar max), 200 ft/60 m depth gauge range, top and side view compass, and overall dimensions of 6.9 in x 2.8 in (175 mm x 70 mm).
Compatibility and sizing
The Tina BCD is available in sizes 2XS through L. The package pairs the TC1 computer in Black or White with the Tina BCD, and the Tina BCD is also built to work with the Tusa Duo Air II integrated second stage/power inflator.
What's in the box
- Tina BCD (BC0403B)
- TC1 wrist dive computer (IQ1301)
- RS1001 regulator with SS0001 Safe Second octopus
- SCA-270 analog SPG and compass console
- Roller Mesh Bag
DiveCatalog.com is an authorized Tusa dealer and a dive shop in Irvine, California since 2003. Call 888-701-4017 or chat with us if you have questions about sizing or how these pieces fit together.
- Women's-specific BCD fit: Tina BCD (BC0403B) uses a high-cut waist to reduce lead-weight discomfort, plus A.W.L.S. III weight system and I.H.S. U.S.H. and W.S.S. harness support.
- Durable BCD construction: 500D CORDURA exterior fabric and 420D Nylon interior, with 2 stainless and 4 resin D-rings and 3 dump valves (O.P.E.V. plus 2).
- Rechargeable dive computer: TC1 (IQ1301) runs the Buhlmann ZHL-16C algorithm on a rechargeable LI-ION battery, with Scuba, Plan, Free diving, and Gauge modes.
- Computer alarms and display: audio/visual and vibration alarms plus an adjustable backlight for the TC1.
- Balanced diaphragm regulator: RS1001 first stage (R1000) with an environmentally sealed, cold-water insulated design rated for use below 50°F/10°C and tested to 39°F/4°C.
- Regulator port configuration: 2 high-pressure and 4 low-pressure ports, with 2 high-flow LP ports giving roughly a 15% increase in flow.
- Ambidextrous second stage: RS1001's S0001 second stage has a lightweight composite case, venturi adjustment lever, and ortho-conscious mouthpiece.
- Backup octopus included: SS0001 Safe Second offers left or right hand configuration, a classic downstream valve with purge button, and a reversible hose attachment.
- Analog gauge console: SCA-270 combines a pressure gauge (5000 psi/400 bar, 4350 psi/300 bar max) with a 200 ft/60 m depth gauge and a top and side view compass.
- Low-visibility readability: SCA-270 uses a luminescent dial and includes a gauge boot with rings for BCJ hook attachment.
- Free gear bag: package includes a Roller Mesh Bag for transport and organization.
| Tina BCD model | BC0403B |
| Tina BCD external fabric | 500D CORDURA |
| Tina BCD internal fabric | 420D Nylon |
| Tina BCD dump valves | 3 (O.P.E.V. plus 2) |
| Tina BCD D-rings | 2 stainless, 4 resin |
| Tina BCD lift capacity (XXS / XS / S / M / L) | 22.5 lbf / 24.7 lbf / 29.2 lbf / 36.0 lbf / 36.0 lbf |
| Tina BCD sizes (package) | 2XS, XS, S, M, L |
| TC1 model | IQ1301 |
| TC1 battery | Rechargeable LI-ION |
| TC1 algorithm | Buhlmann ZHL-16C |
| TC1 modes | Scuba, Plan, Free diving, Gauge |
| TC1 colors (package) | Black, White |
| RS1001 first stage | R1000, balanced diaphragm |
| RS1001 ports | 2 HP, 4 LP (2 standard, 2 high-flow) |
| RS1001 high-flow LP increase | Approximately 15% |
| RS1001 cold water rating | Usable below 50°F/10°C, tested to 39°F/4°C |
| RS1001 second stage | S0001 |
| SS0001 octopus configuration | Left or right hand |
| SCA-270 pressure gauge range | 5000 psi/400 bar (4350 psi/300 bar max) |
| SCA-270 depth gauge range | 200 ft/60 m |
| SCA-270 dimensions | 6.9 in x 2.8 in (175 mm x 70 mm) |
- Tina BCD (BC0403B)
- TC1 wrist dive computer (IQ1301)
- RS1001 regulator with SS0001 Safe Second octopus
- SCA-270 analog SPG and compass console
- Roller Mesh Bag
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How should a scuba BCD fit?
A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.
How do I rinse and care for a BCD after diving?
Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.
Should I use integrated weights or a weight belt?
Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.
How do I pack a BCD for travel?
Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.
When does a BCD need to be serviced?
Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.
What is the difference between a jacket-style and a back-inflate BCD?
A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.
Will my BCD fit any scuba tank?
Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.
What is included in the Tusa Tina TC1 Diving Package?
The package includes the Tina BCD (BC0403B), the TC1 wrist dive computer (IQ1301), the RS1001 balanced diaphragm regulator with its SS0001 Safe Second octopus, the SCA-270 analog pressure gauge and compass console, and a free Roller Mesh Bag for transport and storage.
Is the RS1001 regulator in this package DIN or Yoke?
Tusa makes the RS1001 as a standard first stage and also offers a RS1001 DIN version rated to 300 bar/4350 psi. Check with DiveCatalog.com to confirm which configuration ships with this specific package before you order.
How is the TC1 dive computer powered and what modes does it support?
The TC1 (IQ1301) runs on a rechargeable LI-ION battery and uses the Buhlmann ZHL-16C decompression algorithm. It supports Scuba, Plan, Free diving, and Gauge modes, with audio/visual and vibration alarms and an adjustable backlight for visibility.
What sizes does the Tina BCD come in and how much lift do they provide?
The Tina BCD in this package is offered in sizes 2XS, XS, S, M, and L. Published lift capacity is 22.5 lbf (XXS), 24.7 lbf (XS), 29.2 lbf (S), and 36.0 lbf for both M and L.













