Tusa Soverin Alpha TC1 Package w/790
Tusa Soverin Alpha TC1 Package w/790 - Black / L/XL (Large / X-Large) is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at In Store
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Tusa Soverin Alpha TC1 Package w/790 pairs TUSA's jacket-style Soverin-Alpha BCD (item BC0102B) with the RS-790 regulator, which combines the R-700 balanced diaphragm first stage and the S-90 pneumatically balanced second stage. The BCD uses TUSA's A.W.L.S III weight system and is built in sizes XS through L/XL, while the RS-790 first stage is rated for use below 50°F/10°C.
Who it is for
This package suits divers who want a BCD and regulator sized and matched together rather than sourced separately. The BCD's size run (XS, S, M, L/XL) and lift capacities that scale with size, along with a regulator first stage built for cold water use, make it a fit for divers assembling a personal rig across a range of conditions.
Key details
- BCD lift capacity: 18.0 lbf (XS), 24.7 lbf (S), 29.2 lbf (M), 38.2 lbf (L/XL)
- BCD fabric: 500D CORDURA, with 1 stainless steel D-ring and 5 resin D-rings
- BCD harness: Independent Harness System (I.H.S.) with repositionable D-ring and snap hook, Ultimate Stabilizing Harness (U.S.H.), and RiteTite buckle
- BCD inflate/deflate: O.P.E.V. system with 3 total dump valves, plus 2 zippered weight trim pockets and a lumbar/comfort back pad
- Regulator ports: 2 HP ports and 4 LP ports (2 standard, 2 high-flow), with the high-flow ports increasing air flow by up to 15%
- Regulator rating: INT (Yoke) standard, with a DIN version rated to 300 bar/4350 psi
- Regulator cold-water features: anti-freeze system, dry/sealed ambient pressure chamber, and a ribbed first-stage design for heat transfer
Compatibility and sizing
The BCD is offered in Black and White store variants (TUSA publishes Black and Clear), in sizes XS, S, M, and L/XL. It is compatible with the TUSA Duo Air II System (SS0002), the TC-752 knife attachment, and the TC-753 A.P.A. mounting strap, all sold separately.
DiveCatalog.com is an authorized TUSA dealer and a dive shop in Irvine, California, open since 2003. Call 888-701-4017 or start a chat if you need help matching BCD size or regulator configuration to your gear.
- Jacket-style BCD: Soverin-Alpha design built in sizes XS, S, M, and L/XL with lift capacity ranging from 18.0 lbf to 38.2 lbf depending on size.
- A.W.L.S III weight system: Advanced Weight Loading System for integrated weight management, plus 2 zippered weight trim pockets.
- I.H.S. harness: Independent Harness System with a repositionable D-ring and snap hook.
- O.P.E.V. inflate/deflate system: Includes 3 total dump valves for air control.
- 500D CORDURA construction: Internal and external fabric reinforced with 1 stainless steel D-ring and 5 resin D-rings.
- Duo Air II compatible: BCD accepts the TUSA Duo Air II System (SS0002), sold separately.
- R-700 first stage: Balanced diaphragm design with an anti-freeze system and dry/sealed ambient pressure chamber, optimized for use below 50°F/10°C.
- S-90 second stage: Lightweight, compact composite case with a pneumatically balanced mechanism and ortho-conscious mouthpiece.
- Regulator port layout: 2 HP ports and 4 LP ports (2 standard, 2 high-flow), with high-flow ports increasing air flow by up to 15%.
- Yoke or DIN: INT (Yoke) configuration standard, DIN version available rated to 300 bar/4350 psi.
- Venturi adjustment lever: Allows airflow adjustment at the second stage.
| BCD item number | BC0102B |
| BCD sizes | XS, S, M, L/XL |
| BCD colors | Black, White (available store variants) |
| BCD lift capacity (XS) | 18.0 lbf |
| BCD lift capacity (S) | 24.7 lbf |
| BCD lift capacity (M) | 29.2 lbf |
| BCD lift capacity (L/XL) | 38.2 lbf |
| BCD fabric | 500D CORDURA |
| BCD D-rings | 1 stainless steel, 5 resin |
| Regulator item number | RS790 |
| Regulator first stage | R-700 balanced diaphragm |
| Regulator second stage | S-90 pneumatically balanced, composite case |
| Regulator HP ports | 2 |
| Regulator LP ports | 4 (2 standard, 2 high-flow) |
| Regulator air flow increase | Up to 15% via high-flow LP ports |
| Regulator connection | INT (Yoke) standard; DIN version available |
| Regulator DIN rating | 300 bar/4350 psi |
| First stage cold water rating | Optimized for use below 50°F/10°C |
| Regulator warranty | TUSA CARE Free Parts for Life Program (USA only) |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How should a scuba BCD fit?
A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.
How do I rinse and care for a BCD after diving?
Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.
Should I use integrated weights or a weight belt?
Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.
How do I pack a BCD for travel?
Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.
When does a BCD need to be serviced?
Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.
What is the difference between a jacket-style and a back-inflate BCD?
A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.
Will my BCD fit any scuba tank?
Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.
Is the RS-790 regulator in this package DIN or Yoke?
The RS-790 regulator included in this package is configured as INT (Yoke) by standard, though a DIN version is available rated to 300 bar/4350 psi. Confirm which connection type you need for your tank valves before ordering, especially if you dive internationally or with DIN-only cylinders.
What colors and sizes are available for this BCD and regulator package?
This package is stocked in Black and White store variants, in sizes XS, S, M, and L/XL. Lift capacity scales with size, from 18.0 lbf in XS up to 38.2 lbf in L/XL, so choose a size based on your torso fit and the lift you need.
Is the RS-790 regulator suitable for cold water diving?
Yes. The RS-790's R-700 first stage is optimized for use below 50°F/10°C and includes an anti-freeze system, a dry/sealed ambient pressure chamber, and a ribbed first-stage design intended to improve heat transfer and resist freezing in cold conditions.
Can I add weight or cutting accessories to this BCD?
Yes. The BCD is compatible with the TUSA Duo Air II System (SS0002), TC-752 knife attachment, and TC-753 A.P.A. mounting strap, all sold separately.













