Free 1-2 Day Shipping | Get up to 10% cashback | Need It Today? Same-Day Delivery Within 50 Miles

Tusa Liberator Special Open Water Starter Package

Tusa  |  SKU: GE-0103-ANALOG2-XS
Refer & Earn

Sold out
Regular price $1,149.00
Shipping calculated at checkout.

Size


Pick accessories — 90% off with your $1000+ order

and your picks are free.

 

Start  $501 pick $1252 picks
  • DiveCatalog.com Silicone Frameless Dive Mask

    $59.95$6.00

    1
  • DiveCatalog.com Retro Oval Dive Mask Without Nose Pocket Compensator

    $44.95$4.50

    1
  • DiveCatalog.com Classic Oval Dive Mask Silicone

    $44.95$4.50

    1
  • DiveCatalog.com Metal Coil Lanyard with Snap Clips

    $39.95$4.00

    1
  • DiveCatalog.com Junior Rubber Oval Dive Mask (15% smaller)

    $34.95$3.50

    1


Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Product Information

The TUSA Liberator Special Open Water Starter Package bundles the TUSA Liberator BC0103B buoyancy compensator, the RS-1001 regulator, the SS-0001 Safe Second octopus, an SCA-360 3-gauge console, and an included mesh backpack into one open-water setup, available in sizes XS to XL.

Who it is for

This package is built for a diver assembling a complete open-water kit in a single order rather than sourcing a BCD, regulator, octopus, and console separately. The Liberator BCD is offered in five sizes, XS through XL, so the package can be matched to a range of body types, and the included mesh backpack gives the diver a way to carry the gear to and from the water.

Key details

  • Liberator BC0103B is a wrap-around jacket-style BCD with a tilt valve inflator, Advanced Weight Loading System III (AWLS III) weight cartridges, and an Ultimate Stabilizing Harness.
  • Liberator BCD shell uses 500D Cordura exterior fabric and 420D Nylon interior fabric with urethane lamination, in Black or Clear.
  • Liberator BCD has 1 stainless steel D-ring, 4 resin D-rings, and 3 dump valves (O.P.E.V. plus 2 overpressure relief valves).
  • RS-1001 regulator pairs an R1000 balanced diaphragm first stage with an S0001 second stage, with 2 high-pressure ports and 4 low-pressure ports (2 standard, 2 high-flow).
  • SS-0001 Safe Second octopus uses a downstream valve with a large diaphragm and purge button, and is available in Clear or Yellow.
  • SCA-360 console provides 3-gauge dive data with a top- and side-view compass.

Compatibility and sizing

The Liberator BCD is available in XS, S, M, L, and XL, and is compatible with the TUSA DUO AIR II integrated second-stage regulator/inflator. The RS-1001 regulator first stage is also offered in a DIN configuration rated to 300 bar (4350 psi) in addition to the standard Yoke fitting, and the SS-0001 octopus can be configured for left-hand or right-hand use.

What's in the box

  • Liberator BC0103B buoyancy compensator
  • RS-1001 regulator (first and second stage)
  • SS-0001 Safe Second octopus
  • SCA-360 3-gauge console
  • Mesh backpack

DiveCatalog.com is an authorized TUSA dealer and a dive shop in Irvine, California, open since 2003. Call 888-701-4017 or chat with us if you have questions about sizing, DIN versus Yoke, or how the pieces in this package fit together.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

How should a scuba BCD fit?

A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.

How do I rinse and care for a BCD after diving?

Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.

Should I use integrated weights or a weight belt?

Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.

How do I pack a BCD for travel?

Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.

When does a BCD need to be serviced?

Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.

What is the difference between a jacket-style and a back-inflate BCD?

A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.

Will my BCD fit any scuba tank?

Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.

What is included in the TUSA Liberator Special Open Water Starter Package?

The package includes the Liberator BC0103B buoyancy compensator, the RS-1001 regulator with first and second stage, the SS-0001 Safe Second octopus, an SCA-360 3-gauge console, and an included mesh backpack for carrying the gear.

Does the RS-1001 regulator come in DIN or Yoke?

The RS-1001 is offered in a standard configuration and in an RS1001 DIN version rated to 300 bar (4350 psi), so you can choose the fitting that matches your cylinder valves.

How much lift does the Liberator BCD provide by size?

Lift capacity scales with BCD size: 18 lbs (8.2 kg) in XS, 22.5 lbs (10.2 kg) in S, 31.5 lbs (14.3 kg) in M, 38.2 lbs (17.3 kg) in L, and 46.1 lbs (20.9 kg) in XL.

Can the SS-0001 Safe Second be set up for either hand?

Yes. The SS-0001 Safe Second octopus has a reversible hose attachment and can be configured for left-hand or right-hand use, and it is available in Clear or Yellow.