Tusa Liberator Open Water Basic Starter Package
Tusa Liberator Open Water Basic Starter Package - XS (X-Small) is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at In Store
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Tusa Liberator Open Water Basic Starter Package bundles four individually built Tusa components into one purchase: the Liberator BC-0103B wrap-around jacket-style BCD, the RS1207 regulator, the SS0007 safe second alternate air source, and the SCA-280 analog console, with the BCD offered in sizes XS to XL.
Who it is for
This package is built for divers putting together a first full gear set for open water training, since it covers the BCD, primary regulator, backup second stage, and gauge console in a single kit. The Liberator BC's Advanced Weight Loading System III and Ultimate Stabilizing Harness are designed to simplify weighting and keep the rig secure through a dive.
Key details
- Liberator BC: wrap-around jacket-style BCD with TUSA tilt valve inflator, Advanced Weight Loading System III quick-lock cartridges rated at 8 lbs (3.63 kg) capacity each, Ultimate Stabilizing Harness, and 3 dump/overpressure relief valves (O.P.E.V. +2).
- Liberator BC build: 500D Cordura exterior and 420D nylon with urethane lamination interior, dry weight of 7.1 to 7.7 lbs depending on size, 2 zippered pockets, and stainless-steel plus resin D-rings.
- RS1207 regulator: standard piston first stage with 4 low-pressure ports and 1 high-pressure port; second stage uses a non-compensating downstream valve with Venturi flow adjustment and a large purge button.
- SS0007 safe second: non-compensating downstream valve with Venturi control and a flexible casing, used as the alternate air source (octopus).
- SCA-280 console: 5000 psi/400 bar pressure gauge (4350 psi/300 bar max), 200 ft/60 m depth gauge with Maximum Depth Indicator, luminescent dials, console 6.9 in x 2.8 in (175 mm x 70 mm).
Compatibility and sizing
The Liberator BC is offered in sizes XS, S, M, L, and XL and in Black or Clear; the RS1207 regulator comes in Black or Clear and the SS0007 safe second in Clear. The console included in this package is the imperial SCA-280U version. The Liberator BC is also built to work with TUSA's Duo Air II integrated second-stage regulator and power inflator system.
What's in the box
- Liberator BC
- RS-1207E BK Regulator
- SS0007E Y Safe Second
- SCA-280U Compact Console
- Mesh backpack
DiveCatalog.com is an authorized Tusa dealer and a dive shop in Irvine, California, open since 2003. Call 888-701-4017 or chat with our team if you need help choosing a BCD size or confirming regulator compatibility.
- Wrap-around jacket-style BCD with TUSA's tilt valve inflator.
- Advanced Weight Loading System III quick-lock weight cartridges, rated at 8 lbs (3.63 kg) capacity each.
- Ultimate Stabilizing Harness built into the Liberator BC.
- 3 dump/overpressure relief valves (O.P.E.V. +2) on the Liberator BC.
- 2 zippered pockets on the Liberator BC for accessory storage.
- Durable fabrics using 500D Cordura exterior and 420D nylon with urethane lamination interior.
- RS1207 first stage is a standard piston design with 4 low-pressure ports and 1 high-pressure port.
- RS1207 second stage uses a non-compensating downstream valve with Venturi flow adjustment and a large purge button.
- SS0007 safe second functions as the alternate air source with a non-compensating downstream valve and Venturi control.
- SCA-280 console gauges read 5000 psi/400 bar pressure and 200 ft/60 m depth with a Maximum Depth Indicator.
- SCA-280 console design has a luminescent dial, no radioactive materials, and a gauge boot with rings for BCJ hook attachment.
| Liberator BC Model | BC-0103B |
| Liberator BC Sizes | XS, S, M, L, XL |
| Liberator BC Colors | Black, Clear |
| Liberator BC Dump Valves | 3 (O.P.E.V. +2) |
| Liberator BC Weight Cartridge Capacity | 8 lbs (3.63 kg) each |
| Liberator BC Dry Weight | 7.1 to 7.7 lbs (size dependent) |
| Liberator BC Exterior Fabric | 500D Cordura |
| Liberator BC Interior Fabric | 420D nylon with urethane lamination |
| RS1207 Regulator First Stage | Standard piston, 4 low-pressure ports, 1 high-pressure port |
| RS1207 Regulator Second Stage | Non-compensating downstream valve, Venturi flow adjustment |
| RS1207 Regulator Colors | Black, Clear |
| SS0007 Safe Second Type | Octopus/alternate air source, non-compensating downstream valve, Venturi control |
| SS0007 Safe Second Color | Clear |
| SCA-280 Console Pressure Gauge | 5000 psi/400 bar (4350 psi/300 bar max) |
| SCA-280 Console Depth Gauge | 200 ft/60 m with Maximum Depth Indicator |
| SCA-280 Console Dimensions | 6.9 in x 2.8 in (175 mm x 70 mm) |
| SCA-280 Console Version Included | Imperial (SCA-280U) |
- Liberator BC
- RS-1207E BK Regulator
- SS0007E Y Safe Second
- SCA-280U Compact Console
- Mesh backpack
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How should a scuba BCD fit?
A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.
How do I rinse and care for a BCD after diving?
Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.
Should I use integrated weights or a weight belt?
Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.
How do I pack a BCD for travel?
Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.
When does a BCD need to be serviced?
Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.
What is the difference between a jacket-style and a back-inflate BCD?
A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.
Will my BCD fit any scuba tank?
Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.
What is included in the Tusa Liberator Open Water Basic Starter Package?
This package includes the Liberator BC, an RS-1207E BK regulator, an SS0007E Y safe second (octopus), an SCA-280U compact console, and a mesh backpack. The four main components are each individually built Tusa products combined into one BCD, regulator, alternate air source, and gauge console kit.
What sizes and colors does the Liberator BC come in?
The Liberator BC is available in sizes XS, S, M, L, and XL, and in Black or Clear. Dry weight ranges from 7.1 to 7.7 lbs depending on size, and each weight cartridge in the Advanced Weight Loading System III holds up to 8 lbs (3.63 kg).
What depth and pressure ranges does the SCA-280 console display?
The SCA-280 console has a pressure gauge rated to 5000 psi/400 bar, with a maximum working range of 4350 psi/300 bar, and a depth gauge rated to 200 ft/60 m that includes a Maximum Depth Indicator to retain the deepest reading of the dive. The console measures 6.9 in x 2.8 in (175 mm x 70 mm).
Can the Liberator BC be used with an integrated alternate inflator regulator instead of the included RS1207 and SS0007?
Yes, the Liberator BC is built to work with TUSA's Duo Air II integrated second-stage regulator and power inflator system. This package, however, ships with the standalone RS1207 regulator and SS0007 safe second rather than an integrated inflator regulator.












