Tusa Liberator BC with AWLS III
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Tusa Liberator BC with AWLS III - XS (X-Small) is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
TUSA Liberator BCD sizing. Imperial in bold, metric underneath.
Waist
| Size | Waist in · cm |
|---|---|
| XS |
22.1–24.1 56–61 |
| S |
23.7–27.6 60–70 |
| M |
25.6–31.5 65–80 |
| L |
29.6–35.5 75–90 |
| XL |
33.5–39.4 85–100 |
Lift capacity, BC weight (dry) and releasable weight
| Size | Lift capacity lbf · N |
BC weight (dry) lb · kg |
Releasable weight lb · kg |
|---|---|---|---|
| XS |
18 80 |
6.4 2.9 |
17.6 8 |
| S |
20.2 90 |
6.6 3 |
17.6 8 |
| M |
27 120 |
6.8 3.1 |
17.6 8 |
| L |
33.7 150 |
7.1 3.2 |
17.6 8 |
| XL |
40.5 180 |
7.1 3.2 |
17.6 8 |
Source: TUSA’s size chart.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Save with a package
Ready-made packages that include this item
Product Information
The TUSA Liberator BC-0103 is a jacket-style buoyancy compensator built from 500D Cordura on the exterior and 420D Nylon on the interior, with internal urethane lamination for durability. It uses TUSA's Advanced Weight Loading System III (A.W.L.S. III) for weight management and the Ultimate Stabilizing Harness (U.S.H.) to help eliminate tank roll, and it is available in sizes XS to XL.
Who it is for
This BC suits divers who want a wrap-around jacket-style design with a tilt valve inflator for inflation and deflation control, along with an integrated weight system that uses quick-lock weight releases on an ergonomic handle grip. The two zippered pockets and multiple D-rings give divers a place to carry and clip small accessories.
Key details
- Lift capacity: XS 18 lbs (8.2 kg), S 22.5 lbs (10.2 kg), M 31.5 lbs (14.3 kg), L 38.2 lbs (17.3 kg), XL 46.1 lbs (20.9 kg)
- BC weight: 7.1 to 7.7 lbs (3.2 to 3.5 kg), depending on size
- D-rings: 1 stainless steel, 4 resin
- Dump and relief valves: 3 total, 1 O.P.E.V. plus 2 overpressure relief valves
- Inflator hose: low-pressure 3/8 inch threaded quick-disconnect
- Weight cartridge capacity: 8 lbs per cartridge
- Harness and buckle: Ultimate Stabilizing Harness (U.S.H.) with a 2-position RiteTite cam strap belt
- Sternum strap with an integrated safety whistle
Compatibility and sizing
The Liberator BC is offered in sizes XS to XL and in Black or Clear. It is compatible with the TUSA DUO AIR II.
What's in the box
- Owner's manual
DiveCatalog.com is an authorized TUSA dealer and a dive shop in Irvine, California since 2003. Call or chat with us if you have questions about sizing or compatibility with your current gear.
- A.W.L.S. III weight system: Advanced Weight Loading System III manages weight loading and distribution with quick-lock weight releases.
- Ergonomic handle grip: Weight cartridges use an ergonomic handle grip paired with quick-lock weight releases.
- Ultimate Stabilizing Harness: The U.S.H. harness is designed to eliminate tank roll.
- RiteTite cam strap belt: A 2-position cam strap (RiteTite) belt secures the waist fit.
- O.P.E.V. inflate/deflate system: Patented O.P.E.V. quick inflate/deflate system works with 2 additional overpressure relief dump valves for 3 valves total.
- Tilt valve inflator: Jacket-style wrap-around design with TUSA's tilt valve inflator.
- Durable materials: Built from 500D Cordura on the exterior and 420D Nylon on the interior, with internal urethane lamination.
- Storage: Two zippered pockets for accessory storage.
- D-rings: 1 stainless steel and 4 resin D-rings for attachment points.
- Sternum strap: Includes a sternum strap with an integrated safety whistle.
- Adjustable straps: Adjustable shoulder and waist straps.
- DUO AIR II compatible: Compatible with the TUSA DUO AIR II.
| Brand | TUSA |
| Model | Liberator BC-0103 (Item BC0103B) |
| BCD Type | Jacket style with tilt valve inflator |
| External fabric | 500D Cordura |
| Internal fabric | 420D Nylon |
| Lamination | Internal urethane lamination |
| Weight System | Advanced Weight Loading System III (A.W.L.S. III) |
| Weight cartridge capacity | 8 lbs per cartridge |
| Harness | Ultimate Stabilizing Harness (U.S.H.) |
| Tank Fastening | 2-position RiteTite cam strap belt |
| Dump/relief valves | 3 total (1 O.P.E.V. + 2 overpressure relief) |
| Inflator hose | Low-pressure 3/8 inch threaded quick-disconnect hose |
| Pockets | Two zippered pockets |
| D-Rings | 1 stainless steel, 4 resin |
| BC Weight | 7.1 to 7.7 lbs (3.2 to 3.5 kg), size dependent |
| Sizes | XS to XL |
| Colors | Black, Clear |
| Lift Capacity - XS | 18 lbs (8.2 kg) |
| Lift Capacity - S | 22.5 lbs (10.2 kg) |
| Lift Capacity - M | 31.5 lbs (14.3 kg) |
| Lift Capacity - L | 38.2 lbs (17.3 kg) |
| Lift Capacity - XL | 46.1 lbs (20.9 kg) |
- Owner's manual
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How should a scuba BCD fit?
A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.
How do I rinse and care for a BCD after diving?
Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.
Should I use integrated weights or a weight belt?
Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.
How do I pack a BCD for travel?
Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.
When does a BCD need to be serviced?
Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.
What is the difference between a jacket-style and a back-inflate BCD?
A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.
Will my BCD fit any scuba tank?
Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.
Is the TUSA Liberator BC compatible with the TUSA DUO AIR II?
Yes, the TUSA Liberator BC-0103 is listed as compatible with the TUSA DUO AIR II. If you are pairing this BC with a DUO AIR II or another TUSA alternate air source inflator, call or chat with us to confirm the fit works for your full setup.
How many D-rings does the TUSA Liberator BC have?
The Liberator BC-0103 has 5 D-rings total: 1 stainless steel D-ring and 4 resin D-rings, giving you several attachment points for accessories alongside its two zippered pockets.
What is the lift capacity of the TUSA Liberator BC by size?
Lift capacity scales with size: XS is 18 lbs (8.2 kg), S is 22.5 lbs (10.2 kg), M is 31.5 lbs (14.3 kg), L is 38.2 lbs (17.3 kg), and XL is 46.1 lbs (20.9 kg), per TUSA's published specifications.
What colors is the TUSA Liberator BC available in?
The TUSA Liberator BC-0103 is offered in Black or Clear, in sizes XS to XL. Contact us to confirm current color and size availability before you order.















