Scubapro LP Hose Air2/BPI (64 cm, 25.2 in)
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Scubapro LP Hose Air2/BPI (64 cm, 25.2 in) is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
-
DiveCatalog.com Quick Dry Multi Accessory Dive Gear Hanger for Boots, Gloves, Hood
$22.95$2.30
-
Nocturnal Lights Buoyancy & Protective Sleeve for the SLX Underwater LED Lights
$19.99$2.00
-
Nocturnal Lights YS Arm Adapter for M700 Lights ADP.M7YS
$19.99$2.00
-
Nocturnal Lights Ball Joint Adapter for Underwater Ball Joint Arm Strobe and Lighting Systems
$19.99$2.00
-
Nocturnal Lights Large Hand Mount with 1.75-2 Light Slot HM.LG
$19.99$2.00
-
Nocturnal Lights Medium Hand Mount with 1.385-1.625 Light Slot HM.MED
$19.99$2.00
-
Nocturnal Lights Small Universal Hand Mount with Two 1-1.25 Slots HM.SM
$19.99$2.00
-
DiveCatalog DIN Cap for 1st Stage (Female) for Scuba Diving Tanks - Scuba Essentials
$19.95$2.00
-
DiveCatalog Comfo-Bite Silicone Mouthpiece for Scuba Diving Regulators Black
$19.95$2.00
-
DiveCatalog Scuba Essentials - Wetsuit Hanger for Scuba Diving, Snorkeling, and Surfing
$19.95$2.00
-
DiveCatalog Essentials - BCD and Regulator Hanger for Scuba Diving
$19.95$2.00
-
Nocturnal Lights 45 Degree Ball Joint Adapter with T-base Slot BJADAPTER.TBASE45
$18.99$1.90
-
DiveCatalog.com Underwater Pointer Tool
$18.95$1.90
-
DiveCatalog Hose Clamp for Scuba Diving - Scuba Essentials
$17.95$1.80
-
DiveCatalog Neoprene Mask Strap Cover
$17.00$1.70
-
Nocturnal Lights 90 Degree Ball Joint Adapter with T-base Slot BJADAPTER.TBASE90
$15.99$1.60
-
Nocturnal Lights 2 YS Flex Arm Extra Short FLEXARM.YS2
$15.99$1.60
-
DiveCatalog Silicone Mouthpiece Replacement w/ installation - Scuba Essentials
$14.95$1.50
-
DiveCatalog Silicone Scuba Octopus Mouthpiece with Color Tab & Regulator Tie – Comfortable, Leak-Free Dual Color
$14.95$1.50
-
DiveCatalog.com Basic Black Silicone Snorkel
$14.95$1.50
-
DiveCatalog Rubber Tank Valve Protector for Scuba Diving Tanks - Scuba Essentials
$11.95$1.20
-
DiveCatalog.com Regulator Necklace
$11.95$1.20
-
DiveCatalog.com Water Activated LED Signal Light - Green
$11.95$1.20
-
DiveCatalog Fin Strap and Scuba Dive Accessory Holder Scuba Accessory Essentials
$9.95$1.00
-
DiveCatalog x Stream2Sea Mask Defog, Flip Cap Bottle, 2 oz
$9.95$1.00
-
DiveCatalog.com Dry Box with Lanyard
$9.95$1.00
-
DiveCatalog x Stream2Sea Mask Defog Spray, 2 oz
$9.95$1.00
-
DiveCatalog Female Quick Release Clip with Bungee cord for Scuba Accessory Essentials
$8.99$0.90
-
DiveCatalog.com Fin Holder
$7.95$0.80
-
DiveCatalog.com Scuba Mouthpiece Cover
$7.95$0.80
-
Multi-Purpose Clip with Male and Female Quick Release Clip and Bungee Cord Scuba Accessory Essentials by DiveCatalog
$5.95$0.60
-
DiveCatalog Scuba Essentials - PVC Tank Valve Protector for Scuba Diving Tanks
$5.95$0.60
-
Whistle with Lanyard in Orange by DiveCatalog
$5.00$0.50
-
Nocturnal Lights 7 Ultra Slim Underwater Camera Tray TRAY.SLIM5
$3.99$0.40
-
DiveCatalog.com Stainless Steel 2 Inch Webbing Keeper with Serrated Teeth Weights
$1.95$0.20
-
DiveCatalog.com Weight Keeper Stopper - Black
$1.45$0.15
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Scubapro LP Hose Air2/BPI (64 cm, 25.2 in) is a genuine Scubapro low-pressure hose, part number 01.310.026, sold under the LP Hose Air2/BPI name and supplied in a single 64 cm (25.2 in) length. It is a replacement and configuration part for divers who need a short LP hose rather than a full-length one.
Who it is for
This hose suits divers replacing a worn or aging low-pressure hose on an existing setup, and divers fine-tuning hose routing who want a compact length that reduces excess hose and keeps the configuration tidy. Because it is a genuine Scubapro part with a Scubapro part number, it is the straightforward choice for owners who prefer to keep their life support components within one brand's parts program. Scubapro's own X-TEK Sidemount Regulator Kit, DIN lists four LP hoses in its contents, including one 64 cm hose.
Key details
- Low-pressure (LP) hose, 64 cm (25.2 in) length
- Scubapro part number 01.310.026, barcode 4048336089104
- Sold under the LP Hose Air2/BPI name in this listing
- Sold as a single configuration, one length only
Compatibility and sizing
The listed length is 64 cm, or 25.2 inches. Scubapro does not publish thread size, working pressure, materials or a quick-disconnect fitment list for part number 01.310.026 on its official product pages, so if you are matching this hose to a specific inflator, AIR2 or regulator port, confirm the fitting on your current hose first. The X-TEK Sidemount Regulator Kit, DIN lists a 64 cm LP hose, plus BPI quick couplings and an LP hose elbow separately.
DiveCatalog.com is an authorized Scubapro dealer and a real dive shop in Irvine, California since 2003. Call 888-701-4017 or start a chat and we will help you confirm the right hose length and fitting for your exact setup before you order.
- Genuine Scubapro part supplied under Scubapro part number 01.310.026.
- Low-pressure hose intended for low-pressure (LP) port applications, not high-pressure gauge use.
- 64 cm length equal to 25.2 inches, the single length offered.
- AIR2/BPI hose sold under the LP Hose Air2/BPI name in this listing.
- Compact routing the short length helps reduce excess hose in a streamlined configuration.
- Single configuration offered in one length with no size or fitting options to choose.
- Barcode 4048336089104 for straightforward parts identification and reordering.
- Same 64 cm length found in Scubapro kits Scubapro's X-TEK Sidemount Regulator Kit, DIN lists four LP hoses including one 64 cm hose.
- Confirm fittings before ordering Scubapro does not publish thread size, working pressure or material data for this part number, so match it against your current hose.
| Brand | Scubapro |
| Product | LP Hose Air2/BPI |
| Type | Low-pressure (LP) hose |
| Length | 64 cm (25.2 in) |
| Part number | 01.310.026 |
| Barcode | 4048336089104 |
| Category | Accessories, hoses and adapters |
| Configurations offered | One, single length |
| Thread size | Not published by Scubapro for this part number |
| Working pressure | Not published by Scubapro for this part number |
| Hose material | Not published by Scubapro for this part number |
| Quick-disconnect adapter | Not published as included |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How long is the Scubapro LP Hose Air2/BPI?
It is 64 cm long, which is 25.2 inches. That is the length listed for this part, sold in that one length only. The short length is intended for compact, streamlined routing where a full-length low-pressure hose would leave excess hose to manage.
Does this hose come with a quick-disconnect adapter?
A quick-disconnect adapter is not published as included with part number 01.310.026. Scubapro does not print a contents list for this standalone hose, so treat it as the hose itself. In Scubapro's X-TEK Sidemount Regulator Kit, DIN, the BPI quick couplings and the LP hose elbow are listed as separate items from the LP hoses, which supports ordering fittings separately if you need them.
Is this the same 64 cm hose used in the X-TEK Sidemount Regulator Kit?
Scubapro's X-TEK Sidemount Regulator Kit, DIN contents list includes four LP hoses: two at 20 cm, one at 64 cm and one at 210 cm. That confirms a 64 cm LP hose exists in the Scubapro line, but Scubapro does not print part number 01.310.026 on that kit page, so we cannot state the two are identical components.
How do I confirm this hose fits my setup?
Measure or check the hose you are replacing and compare the fitting on each end, because Scubapro does not publish thread size or working pressure for part number 01.310.026. Length is listed as 64 cm (25.2 in). If you are unsure, contact our Irvine, California dive shop with your regulator, inflator or AIR2 model and we will check it with you.
