Scubapro L.P. Hose w/QD
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Scubapro L.P. Hose w/QD is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
-
DiveCatalog.com Quick Dry Multi Accessory Dive Gear Hanger for Boots, Gloves, Hood
$22.95$2.30
-
DiveCatalog DIN Cap for 1st Stage (Female) for Scuba Diving Tanks - Scuba Essentials
$19.95$2.00
-
DiveCatalog Comfo-Bite Silicone Mouthpiece for Scuba Diving Regulators Black
$19.95$2.00
-
DiveCatalog Scuba Essentials - Wetsuit Hanger for Scuba Diving, Snorkeling, and Surfing
$19.95$2.00
-
DiveCatalog Essentials - BCD and Regulator Hanger for Scuba Diving
$19.95$2.00
-
DiveCatalog.com Underwater Pointer Tool
$18.95$1.90
-
DiveCatalog Hose Clamp for Scuba Diving - Scuba Essentials
$17.95$1.80
-
DiveCatalog Neoprene Mask Strap Cover
$17.00$1.70
-
DiveCatalog Silicone Mouthpiece Replacement w/ installation - Scuba Essentials
$14.95$1.50
-
DiveCatalog Silicone Scuba Octopus Mouthpiece with Color Tab & Regulator Tie – Comfortable, Leak-Free Dual Color
$14.95$1.50
-
DiveCatalog.com Basic Black Silicone Snorkel
$14.95$1.50
-
DiveCatalog Rubber Tank Valve Protector for Scuba Diving Tanks - Scuba Essentials
$11.95$1.20
-
DiveCatalog.com Regulator Necklace
$11.95$1.20
-
DiveCatalog.com Water Activated LED Signal Light - Green
$11.95$1.20
-
DiveCatalog Fin Strap and Scuba Dive Accessory Holder Scuba Accessory Essentials
$9.95$1.00
-
DiveCatalog x Stream2Sea Mask Defog, Flip Cap Bottle, 2 oz
$9.95$1.00
-
DiveCatalog.com Dry Box with Lanyard
$9.95$1.00
-
DiveCatalog x Stream2Sea Mask Defog Spray, 2 oz
$9.95$1.00
-
DiveCatalog Female Quick Release Clip with Bungee cord for Scuba Accessory Essentials
$8.99$0.90
-
DiveCatalog.com Fin Holder
$7.95$0.80
-
DiveCatalog.com Scuba Mouthpiece Cover
$7.95$0.80
-
Multi-Purpose Clip with Male and Female Quick Release Clip and Bungee Cord Scuba Accessory Essentials by DiveCatalog
$5.95$0.60
-
DiveCatalog Scuba Essentials - PVC Tank Valve Protector for Scuba Diving Tanks
$5.95$0.60
-
Whistle with Lanyard in Orange by DiveCatalog
$5.00$0.50
-
DiveCatalog.com Stainless Steel 2 Inch Webbing Keeper with Serrated Teeth Weights
$1.95$0.20
-
DiveCatalog.com Weight Keeper Stopper - Black
$1.45$0.15
-
Nocturnal Lights Buoyancy & Protective Sleeve for the SLX Underwater LED Lights
$19.99$2.00
-
Nocturnal Lights YS Arm Adapter for M700 Lights ADP.M7YS
$19.99$2.00
-
Nocturnal Lights Ball Joint Adapter for Underwater Ball Joint Arm Strobe and Lighting Systems
$19.99$2.00
-
Nocturnal Lights Large Hand Mount with 1.75-2 Light Slot HM.LG
$19.99$2.00
-
Nocturnal Lights Medium Hand Mount with 1.385-1.625 Light Slot HM.MED
$19.99$2.00
-
Nocturnal Lights Small Universal Hand Mount with Two 1-1.25 Slots HM.SM
$19.99$2.00
-
Nocturnal Lights 45 Degree Ball Joint Adapter with T-base Slot BJADAPTER.TBASE45
$18.99$1.90
-
Nocturnal Lights 90 Degree Ball Joint Adapter with T-base Slot BJADAPTER.TBASE90
$15.99$1.60
-
Nocturnal Lights 2 YS Flex Arm Extra Short FLEXARM.YS2
$15.99$1.60
-
Nocturnal Lights 7 Ultra Slim Underwater Camera Tray TRAY.SLIM5
$3.99$0.40
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Scubapro L.P. Hose w/QD is a genuine Scubapro low pressure hose, manufacturer part number 01.310.027, fitted with a quick-disconnect (QD) coupling on the inflator end. It carries low pressure gas from a low pressure port on a regulator first stage to a BCD power inflator, and the QD collar lets that connection be made or released with a quick pull.
Who it is for
This hose is for divers who need a replacement or spare inflation hose for a buoyancy compensator, and for technicians and dive shops servicing BCD and inflator assemblies. It suits anyone whose original hose is aging, damaged or missing, anyone building up a BCD with a power inflator, and travelers who prefer to carry a manufacturer spare. Because the QD end separates from the inflator in seconds, it is also convenient for divers who break down and rinse their gear after every day of diving.
Key details
- Genuine Scubapro manufacturer part, number 01.310.027, barcode 4048336426602.
- Low pressure (LP) hose, not a high pressure or SPG hose.
- First stage end threads onto a standard low pressure port.
- Inflator end uses a quick-disconnect coupling for fast connection and release.
- Serves as a direct replacement or spare in BCD power inflator setups.
Compatibility and sizing
The hose is identified by its Scubapro part number rather than by a published length, and Scubapro inflator hoses are specific to the part number ordered. If you are matching this hose to a particular BCD or power inflator, confirm the part number called out for your assembly before ordering. The threaded end mates with a standard low pressure port on a regulator first stage.
DiveCatalog.com is an authorized Scubapro dealer and a real dive shop in Irvine, California since 2003. Call us at 888-701-4017 or start a chat and we will confirm the correct hose and fitting for your first stage and inflator before you order.
- Genuine Scubapro part low pressure hose supplied as manufacturer part number 01.310.027.
- Quick-disconnect coupling on the inflator end for fast connecting and releasing.
- Low pressure service designed to carry low pressure gas, not high pressure gauge pressure.
- Standard LP port thread on the first stage end for mounting to a regulator low pressure port.
- Feeds a BCD power inflator routing low pressure gas from the first stage to the inflator mechanism.
- Direct replacement or spare for BCD and inflator assemblies.
- Easy gear breakdown because the QD collar separates the hose from the inflator in seconds for rinsing, travel or service.
- Identified by barcode 4048336426602 so you can match the exact part when reordering.
| Brand | Scubapro |
| Product Type | Low pressure hose with quick disconnect |
| Part Number / SKU | 01.310.027 |
| Barcode | 4048336426602 |
| Hose Type | Low pressure (LP) |
| First Stage End Fitting | Low pressure port thread |
| Inflator End Fitting | Quick-disconnect (QD) coupling |
| Application | Connecting a BCD power inflator to a first stage low pressure port |
| Use Case | Direct replacement or spare hose for inflator setups |
| Category | Accessories, hoses and adapters |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
What is this part called and where can I buy it?
It is called the Scubapro L.P. Hose w/QD, a low pressure inflator hose with a quick-disconnect coupling, listed under Scubapro part number 01.310.027 and barcode 4048336426602. It is a Scubapro manufacturer part, so it is ordered by that part number through authorized Scubapro dealers. Quoting part number 01.310.027 helps ensure you receive the correct hose.
Which end connects to the regulator and which end to the inflator?
The threaded end connects to the regulator. It screws onto a standard low pressure port on your first stage. The opposite end carries the quick-disconnect coupling, which pushes onto the fitting on your BCD power inflator and releases when you pull back the collar. That design lets you separate the BCD from the regulator for rinsing, packing or service.
How long is this hose?
Scubapro does not publish a length for this item in our listing information, and Scubapro inflator hoses are specific to the part number ordered rather than interchangeable by length. This hose is supplied as part number 01.310.027. If you need a particular routing length for your BCD or sidemount setup, contact us at 888-701-4017 with your configuration and we will confirm the right part.
Will it work with an inflator-integrated alternate air source?
This hose is Scubapro part 01.310.027 with a standard low pressure port thread; tell us your first stage and inflator and we will verify fit. This hose is Scubapro part 01.310.027 with a standard low pressure port thread at the first stage end. Tell us your first stage and inflator model and we will verify whether 01.310.027 is the hose your assembly calls for.
