Dive Rite Intermediate Pressure Gauge LP Inflator Hose Regulator Test Tool
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Dive Rite Intermediate Pressure Gauge LP Inflator Hose Regulator Test Tool is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
-
DiveCatalog.com Quick Dry Multi Accessory Dive Gear Hanger for Boots, Gloves, Hood
$22.95$2.30
-
Nocturnal Lights Ball Joint Adapter for Underwater Ball Joint Arm Strobe and Lighting Systems
$19.99$2.00
-
Nocturnal Lights Buoyancy & Protective Sleeve for the SLX Underwater LED Lights
$19.99$2.00
-
Nocturnal Lights YS Arm Adapter for M700 Lights ADP.M7YS
$19.99$2.00
-
Nocturnal Lights Large Hand Mount with 1.75-2 Light Slot HM.LG
$19.99$2.00
-
Nocturnal Lights Medium Hand Mount with 1.385-1.625 Light Slot HM.MED
$19.99$2.00
-
Nocturnal Lights Small Universal Hand Mount with Two 1-1.25 Slots HM.SM
$19.99$2.00
-
DiveCatalog DIN Cap for 1st Stage (Female) for Scuba Diving Tanks - Scuba Essentials
$19.95$2.00
-
DiveCatalog Comfo-Bite Silicone Mouthpiece for Scuba Diving Regulators Black
$19.95$2.00
-
DiveCatalog Essentials - BCD and Regulator Hanger for Scuba Diving
$19.95$2.00
-
DiveCatalog Scuba Essentials - Wetsuit Hanger for Scuba Diving, Snorkeling, and Surfing
$19.95$2.00
-
Nocturnal Lights 45 Degree Ball Joint Adapter with T-base Slot BJADAPTER.TBASE45
$18.99$1.90
-
DiveCatalog.com Underwater Pointer Tool
$18.95$1.90
-
DiveCatalog Hose Clamp for Scuba Diving - Scuba Essentials
$17.95$1.80
-
DiveCatalog Neoprene Mask Strap Cover
$17.00$1.70
-
Nocturnal Lights 90 Degree Ball Joint Adapter with T-base Slot BJADAPTER.TBASE90
$15.99$1.60
-
Nocturnal Lights 2 YS Flex Arm Extra Short FLEXARM.YS2
$15.99$1.60
-
DiveCatalog.com Basic Black Silicone Snorkel
$14.95$1.50
-
DiveCatalog Silicone Scuba Octopus Mouthpiece with Color Tab & Regulator Tie – Comfortable, Leak-Free Dual Color
$14.95$1.50
-
DiveCatalog Silicone Mouthpiece Replacement w/ installation - Scuba Essentials
$14.95$1.50
-
DiveCatalog Rubber Tank Valve Protector for Scuba Diving Tanks - Scuba Essentials
$11.95$1.20
-
DiveCatalog.com Regulator Necklace
$11.95$1.20
-
DiveCatalog.com Water Activated LED Signal Light - Green
$11.95$1.20
-
DiveCatalog x Stream2Sea Mask Defog, Flip Cap Bottle, 2 oz
$9.95$1.00
-
DiveCatalog Fin Strap and Scuba Dive Accessory Holder Scuba Accessory Essentials
$9.95$1.00
-
DiveCatalog.com Dry Box with Lanyard
$9.95$1.00
-
DiveCatalog x Stream2Sea Mask Defog Spray, 2 oz
$9.95$1.00
-
DiveCatalog Female Quick Release Clip with Bungee cord for Scuba Accessory Essentials
$8.99$0.90
-
DiveCatalog.com Fin Holder
$7.95$0.80
-
DiveCatalog.com Scuba Mouthpiece Cover
$7.95$0.80
-
Multi-Purpose Clip with Male and Female Quick Release Clip and Bungee Cord Scuba Accessory Essentials by DiveCatalog
$5.95$0.60
-
DiveCatalog Scuba Essentials - PVC Tank Valve Protector for Scuba Diving Tanks
$5.95$0.60
-
Whistle with Lanyard in Orange by DiveCatalog
$5.00$0.50
-
Nocturnal Lights 7 Ultra Slim Underwater Camera Tray TRAY.SLIM5
$3.99$0.40
-
DiveCatalog.com Stainless Steel 2 Inch Webbing Keeper with Serrated Teeth Weights
$1.95$0.20
-
DiveCatalog.com Weight Keeper Stopper - Black
$1.45$0.15
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Dive Rite Intermediate Pressure Gauge is a compact regulator test tool that reads the intermediate pressure a first stage is delivering, so a diver or technician can confirm whether a regulator is holding its setting or creeping. It plugs into any standard low pressure inflator hose, which means no disassembly is required to take a reading, and it displays both imperial and metric scales.
Who it is for
This gauge suits technical and recreational divers who service or monitor their own gear, dive shop and regulator service technicians, and anyone who wants a quick field check before a trip. Because intermediate pressure drift and creep are early warning signs of a first stage that needs attention, the gauge is equally useful for a pre-trip inspection, a post-service verification, or a diagnostic check on a regulator that is free flowing or breathing oddly.
Key details
- Reads first stage intermediate pressure to verify the setting and detect creep.
- Connects to any standard low pressure (LP) inflator hose with no disassembly required.
- Dual graduated scales: imperial in 10 PSI increments and metric in 0.5 kg/cm² increments.
- Brass mechanism inside a plastic body, with a chrome plated brass nipple.
- Measures 1.75" x 3.5" (4.45 cm x 8.9 cm) and weighs 2.6 oz (0.07 kg).
- Dive Rite part number RG1269.
Compatibility and sizing
The gauge uses the standard low pressure inflator fitting, so it attaches to any standard LP inflator hose. Nothing on the regulator needs to be removed; it plugs into any standard LP inflator hose to read intermediate pressure. At 2.6 oz it adds almost nothing to a tool bag or save a dive kit.
DiveCatalog.com is an authorized Dive Rite dealer and a real dive shop in Irvine, California since 2003. Call 888-701-4017 or start a chat if you want help confirming that this gauge will fit your inflator hose or regulator setup.
- Reads intermediate pressure so you can check whether a first stage is holding its setting or creeping.
- No disassembly needed because it plugs directly into any standard low pressure inflator hose.
- Dual graduated scales in imperial at 10 PSI increments and metric at 0.5 kg/cm² increments.
- Brass mechanism housed inside a plastic body.
- Chrome plated brass nipple for the inflator hose connection.
- Compact 1.75" x 3.5" body (4.45 cm x 8.9 cm) that stores easily in a tool bag.
- Light at 2.6 oz (0.07 kg), so it can live permanently in a save a dive kit.
- Dive Rite RG1269, a diagnostic tool for technicians and owner serviced regulator users alike.
| Brand | Dive Rite |
| Model | Intermediate Pressure Gauge |
| Part Number / SKU | RG1269 |
| Type | Regulator intermediate pressure test gauge |
| Connection | Standard low pressure inflator hose |
| Imperial Scale | 10 PSI increments |
| Metric Scale | 0.5 kg/cm² increments |
| Mechanism | Brass |
| Body Material | Plastic |
| Nipple Material | Chrome plated brass |
| Dimensions | 1.75" x 3.5" (4.45 cm x 8.9 cm) |
| Weight | 2.6 oz (0.07 kg) |
| UPC | 879642005762 |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How do you use the Dive Rite Intermediate Pressure Gauge?
Plug the gauge into any standard low pressure inflator hose and pressurize the regulator to read the intermediate pressure being delivered. The gauge displays the intermediate pressure the first stage is delivering. No disassembly of the regulator is required, which makes it practical for a quick check before or after a dive trip.
What is regulator creep and can this gauge detect it?
Creep is a slow rise in intermediate pressure after the first stage has locked up, and this gauge is designed to show it. Creep is a slow rise in intermediate pressure after the first stage locks up, and this gauge is designed to show whether pressure holds steady.
Does it read in both PSI and metric units?
Yes. It has dual graduated scales: imperial in 10 PSI increments and metric in 0.5 kg/cm2 increments. The imperial scale is graduated in 10 PSI increments and the metric scale in 0.5 kg/cm2 increments, so you can read the intermediate pressure in whichever unit your regulator specifications are published in.
Will this gauge fit my regulator's inflator hose?
It connects to any standard low pressure inflator hose and uses a chrome plated brass nipple for that connection. If you are unsure whether your hose uses the standard fitting, call DiveCatalog at 888-701-4017 and we will check it with you.
