Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Mares Dual 15X Regulator is a lightweight, simple first- and second-stage scuba regulator set that pairs the balanced diaphragm 15X first stage and its ACT valve with the compact 183 g Dual second stage, sold in black with a choice of DIN or INT (yoke) connection. Mares positions it as a first-configuration regulator for novice divers who want dependable, uncomplicated breathing performance.
Who it is for
This is a set for the diver buying their own regulator for the first time, for students moving out of rental gear, and for recreational divers who value low weight and a simple, uncomplicated regulator over technical features. The travel-friendly lightweight technopolymer second stage also makes it a practical regulator for trips and training dives.
Key details
- 15X balanced diaphragm first stage with ACT valve, available in DIN or INT (yoke)
- Second stage weighs 183 g / 6.4 oz and is built from lightweight Ultralight Technopolymer
- First stage weight: 772 g / 27.2 oz (INT) or 598 g / 21.1 oz (DIN)
- Total weight: 1085 g (INT) or 911 g / 32.1 oz (DIN)
- Ports: 2 HP 7/16" UNF and 4 LP 3/8" UNF
- 75 cm Superflex hose for flexible routing and comfortable head movement
- Mares DFC, AST and VAD technologies for airflow, water exclusion and breathing sensitivity
Compatibility and sizing
Choose the INT (yoke) version for the A-clamp cylinder valves common in much of the recreational world, or the DIN version to screw directly into a DIN valve. The four low-pressure ports allow an octopus and other second-stage routing, while the two high-pressure ports accept a gauge or transmitter fitting in 7/16" UNF.
DiveCatalog.com is an authorized Mares dealer and a real dive shop in Irvine, California since 2003. Call 888-701-4017 or start a chat if you need help choosing between DIN and yoke or confirming hose and port compatibility with your existing gear.
- 15X first stage with ACT valve balanced diaphragm design delivers steady airflow as depth and tank pressure change.
- 183 g second stage compact Dual second stage weighs just 6.4 oz for low jaw fatigue.
- Ultralight technopolymer construction lightweight, corrosion-resistant material through the second stage.
- DIN or INT connection offered with a DIN/INT (yoke) cylinder valve fitting, in black.
- DFC Technology optimizes airflow through designated low-pressure ports for consistent breathing performance.
- AST Technology automatically prevents water entry into the first stage, opening when pressurized and closing when not, with no action from the diver.
- VAD Technology a bypass tube creates a vortex and low-pressure center that assists diaphragm movement for natural breathing at all depths.
- 75 cm Superflex hose supple hose for flexible reach and comfortable movement.
- Four low-pressure ports 4 LP 3/8" UNF ports for octopus and second-stage routing.
- Two high-pressure ports 2 HP 7/16" UNF ports for gauge or transmitter mounting.
- Travel-friendly weights total weight of 911 g / 32.1 oz in DIN and 1085 g in INT.
- Built for novice divers Mares positions the Dual 15X as a simple first-configuration regulator set.
| First stage model | 15X with ACT valve |
| First stage type | Balanced diaphragm |
| Regulator connection | DIN/INT (yoke) |
| Material | Ultralight / lightweight technopolymer |
| Color | Black |
| Second stage weight | 183 g / 6.4 oz |
| First stage weight (INT) | 772 g / 27.2 oz |
| First stage weight (DIN) | 598 g / 21.1 oz |
| Total weight (INT) | 1085 g |
| Total weight (DIN) | 911 g / 32.1 oz |
| High pressure ports | 2 HP 7/16" UNF |
| Low pressure ports | 4 LP 3/8" UNF |
| Hose type | Superflex hose |
| Hose length | 75 cm |
| Technologies | DFC, AST, VAD |
| SKU (yoke) | 416258INTBK |
| SKU (DIN) | 416258DINBK |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
Is the Mares Dual 15X a good regulator for a new diver?
Yes. Mares positions the Dual 15X as a simple, lightweight first-configuration regulator set for novice scuba divers. It combines the balanced diaphragm 15X first stage with an ACT valve and the 183 g Dual second stage made of lightweight technopolymer, so breathing stays consistent as depth and tank pressure change while the second stage stays light in the mouth.
What does the ACT valve and AST technology do on the 15X first stage?
AST Technology automatically prevents water from entering the first stage, opening when the regulator is pressurized and closing when it is not.
Which connection options and hose does the Dual 15X come with?
The Dual 15X is offered in two versions, DIN and INT (yoke), both in black, so you can match the cylinder valves you dive. The second stage is supplied on a 75 cm Superflex hose. The first stage carries two high pressure ports in 7/16" UNF and four low pressure ports in 3/8" UNF for an octopus, gauge or other accessories.
How much does the Mares Dual 15X weigh for travel?
Total weight is 911 g / 32.1 oz for the DIN version and 1085 g for the INT (yoke) version. The first stage alone is 598 g / 21.1 oz in DIN and 772 g / 27.2 oz in INT, with the technopolymer second stage adding only 183 g / 6.4 oz. The DIN version is the lighter choice for packing.
Review summary
Reviewers consistently describe this as a solid, well-made regulator that breathes easily and holds up over repeated dives, with one owner reporting more than 35 dives on the set. Several mention good value and good quality for what you pay, and the complete regulator set is a frequent highlight. One diver did hit a noisy second stage with a flutter that eased with use, so a shop check before your first trip is worth it. Good fit for divers wanting a complete, easy-breathing setup.
What reviewers like
Good to know


















