Hollis LTS Light Travel System Back Inflate BCD for Traveling Divers

Hollis | SKU: 208.1110.005

Refer & Earn

$599.95

Shipping calculated at checkout.

In stock — ships from Irvine, CA

Size

L (Large) S (Small) M (Medium) XL (X-Large)

Pickup available at In Store

Usually ready in 2 hours

All Hollis size charts on one page. Imperial in bold, metric underneath.

Wetsuits

Hollis Neotek wetsuits

Weight and height

Size	Weight lb · kg	Height ft/in · cm
SM	135–150 61–68	5′6″–5′8″ 167–172
MD	155–170 70–77	5′8″–5′10″ 172–177
ML	165–180 74–81	5′9″–5′11″ 175–180
LG/SH	170–185 74–81	5′7″–5′9″ 170–175
LG	175–190 79–86	5′10″–6′1″ 177–182
XL/SH	185–200 81–88	5′8″–5′10″ 172–177
XL	190–205 86–92	5′11″–6′3″ 180–190
2XL	205–220 92–99	6′0″–6′3″ 182–190
3XL	230–260 104–117	6′1″–6′4″ 185–193

Chest, waist and hip

Size	Chest in · cm	Waist in · cm	Hip in · cm
SM	36–38 91–96	29–31 73–78	35–36 88–91
MD	38–40 96–101	31–33 78–83	37–39 93–99
ML	40–41 101–104	32–34 81–86	38–40 96–101
LG/SH	41–42 104–106	33–35 83–88	39–41 99–104
LG	41–42 104–106	33–35 83–88	39–41 99–104
XL/SH	42–44 106–111	35–37 88–93	41–43 104–109
XL	42–44 106–111	35–37 88–93	41–43 104–109
2XL	44–46 111–116	37–39 93–99	44–46 111–116
3XL	47–50 119–127	40–43 101–109	47–50 119–127

Drysuits

Hollis DX-300X drysuit

Weight and height

Size	Weight lb · kg	Height ft/in · cm
XS	120–145 54–66	5′3″–5′6″ 160–168
SM	135–155 61–70	5′6″–5′8″ 168–173
MD	150–175 68–80	5′7″–5′10″ 170–178
ML	170–195 77–89	5′9″–6′0″ 175–183
LG	185–210 84–96	5′10″–6′1″ 178–185
XL	210–240 96–109	5′11″–6′2″ 180–188
2XL	235–265 107–121	6′1″–6′4″ 185–193
3XL	260–295 117–134	6′2″–6′6″ 188–198

Chest, waist, hip and inseam

Size	Chest in · cm	Waist in · cm	Hip in · cm	Inseam in · cm
XS	32–36 81–91	26–30 66–76	32–36 81–91	26–28 66–71
SM	34–38 86–96	28–32 71–81	34–38 86–96	27–29 68–73
MD	37–40 94–101	30–34 76–86	35–39 89–99	28–30 71–76
ML	38–42 96–106	32–36 81–91	37–41 94–104	29–31 73–79
LG	40–44 101–112	34–38 86–96	39–43 99–109	30–32 76–81
XL	42–46 106–117	36–40 91–101	41–45 104–114	31–33 79–84
2XL	44–48 112–122	38–42 96–106	43–47 109–119	32–34 81–86
3XL	46–50 117–127	40–44 101–112	45–49 114–124	33–35 84–89

Boot size

Size	Boot size
XS	7
SM	7
MD	8
ML	9
LG	9
XL	10
2XL	11
3XL	11

Hollis men's AUG 450

Height

Size	Height ft/in · cm
XS	5′5″–5′8″ 165–172.5
SM	5′7″–5′10″ 170–178
MD	5′9″–6′0″ 175.5–183
LG	5′11″–6′2″ 180.5–188
XL	6′1″–6′4″ 185.5–193
2XL	6′3″–6′6″ 190.5–198
3XL	6′5″–6′8″ 195.5–203

Chest, waist and inseam

Size	Chest in · cm	Waist in · cm	Inseam in · cm
XS	30–34 76–86	23–27 58–68	30–31.5 76–80
SM	34–38 86–96	27–30.5 68–78	31–32.5 79–83
MD	38–41.5 96–106	30.5–34.5 78–88	32.5–34 82–86
LG	41.5–45.5 106–116	34.5–38.5 88–98	33.5–35 85–89
XL	45.5–49.5 116–126	38.5–42.5 98–108	34.5–36 88–92
2XL	49.5–53.5 126–136	42.5–46.5 108–118	36–37.5 91–95
3XL	53.5–57.5 136–146	46.5–50.5 118–128	37–38.5 94–98

Fins

Hollis F-1 fins

Size	Shoe size
REGULAR	7–9
XL	10–12
2XL	13–15

Hollis F-2 fins

Size	Shoe size
SMALL	4–6
REGULAR	7–9
XL	10–12

Source: Hollis’s size chart. Values in the second unit come from Hollis’s own chart where it prints them.

Pick an accessory — 90% off with your $250+ order

$2502 items $5003 items $1,0005 items $1,5006 items $2,0008 items $3,00010 items $4,00012 items $5,00015 items

DiveCatalog.com Quick Dry Multi Accessory Dive Gear Hanger for Boots, Gloves, Hood
$22.95$2.30
Nocturnal Lights Ball Joint Adapter for Underwater Ball Joint Arm Strobe and Lighting Systems
$19.99$2.00
Nocturnal Lights Buoyancy & Protective Sleeve for the SLX Underwater LED Lights
$19.99$2.00
Nocturnal Lights YS Arm Adapter for M700 Lights ADP.M7YS
$19.99$2.00
Nocturnal Lights Large Hand Mount with 1.75-2 Light Slot HM.LG
$19.99$2.00

90% off applies automatically at checkout on orders of $250+ — or free for signed-in members. Not combinable with discount codes.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Save with Open Box or Used Purchase

Open Box Hollis LTS Light Travel System Back Inflate BCD for Traveling Divers

Sale price $479.95 Regular price $599.95

Save with a package

Ready-made packages that include this item

Hollis Regulator + BCD Scuba PackageLTS Light Travel System Back Inflate BCD for + 150LX DC7 Regulator + 150LX Octopus$1,489.85

View package

Product Information

The Hollis L.T.S. (Light Travel System) is a weight-integrated, back-inflation BCD built for traveling divers who want a compact single-tank rig without a modular harness. It delivers 30 lb (13.6 kg) of lift, weighs 6.4 lbs (2.9 kg), and works with a single AL80 or steel 85 tank.

Who it is for

This BCD suits warm-water travel divers and resort divers who want to keep luggage weight down without giving up a proper back-inflate air cell. The simple, non-modular design stows easily in a dive bag, and chest and hip D-rings give you a place to clip a sling bottle, light, or other accessories for single-tank recreational dives.

Key details

Lift capacity: 30 lb (13.6 kg)
Unit weight: 6.4 lbs (2.9 kg)
Outer shell: 1000D nylon with a 420D internal bladder
Integrated weight system: 5 lbs dumpable
Compatible with single AL80 or steel 85 tanks
Comfortable backpad for extended dive sessions
Warranty: 5 years

Compatibility and sizing

The Hollis L.T.S. is available in four sizes. Small fits divers 5'2" to 5'7", 120 to 155 lb, with a 30 to 40 inch chest and 30 to 38 inch waist. Medium fits 5'7" to 5'11", 150 to 185 lb, with a 34 to 44 inch chest and 32 to 40 inch waist. Large fits 5'11" to 6'2", 180 to 210 lb, with a 38 to 48 inch chest and 34 to 42 inch waist. X-Large fits 6'2" to 6'5", 195 to 240 lb, with a 40 to 50 inch chest and 38 to 46 inch waist.

DiveCatalog.com is an authorized Hollis dealer and a dive shop in Irvine, California since 2003. Call or chat with us if you need help matching the L.T.S. size to your tank or build.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

How should a scuba BCD fit?

A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.

How do I rinse and care for a BCD after diving?

Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.

Should I use integrated weights or a weight belt?

Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.

How do I pack a BCD for travel?

Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.

When does a BCD need to be serviced?

Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.

What is the difference between a jacket-style and a back-inflate BCD?

A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.

Will my BCD fit any scuba tank?

Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.

How much lift does the Hollis L.T.S. BCD provide and what tanks does it fit?

The Hollis L.T.S. provides up to 30 lb (13.6 kg) of lift, which is enough for a single AL80 or steel 85 tank. Its non-modular, weight-integrated back-inflate design is built for single-cylinder recreational diving rather than doubles or technical configurations, which keeps the package compact for travel.

How do I choose the right size for the Hollis L.T.S. BCD?

Hollis sizes the L.T.S. by height, weight, chest, and waist measurements across four sizes: SM, MD, LG, and XL. For example, Medium fits divers 5'7" to 5'11" tall, 150 to 185 lb, with a 34 to 44 inch chest and 32 to 40 inch waist. Match your own measurements to the closest range, and call us if you fall between two sizes.

How much does the Hollis L.T.S. BCD weigh?

The Hollis L.T.S. weighs 6.4 lbs (2.9 kg), which is part of why it is marketed as a light travel system for divers packing light for warm-water trips. This unit weight is for the BCD itself and does not include the tank or any added accessories clipped to the D-rings.

What warranty comes with the Hollis L.T.S. BCD?

The Hollis L.T.S. is backed by a 5-year manufacturer's warranty. The Hollis L.T.S. is backed by a 5-year manufacturer's warranty.

5 stars: 2 (100%)
4 stars: 0 (0%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

excellent service

I have not had a chance to dive with this BC. However, Divecatalog provided great service by keeping me informed and quick service.

Have not gotten a chance to dive with it yet but package was on time. They also kept me up to date of the status. Thank you

XL is what exactly size????
Chest (inches)
Waist (inches)

DiveCatalog.com

Emily and the DiveCatalog team!

Brand	Hollis
Model	L.T.S. Light Travel System
BCD Type	Back inflate, weight integrated, non-modular
Weight	6.4 lbs (2.9 kg)
Lift Capacity	30 lb (13.6 kg)
Compatible Tanks	Single AL80, steel 85
Outer Shell	1000D nylon
Internal Bladder	420D
Integrated Weight System	5 lbs dumpable
Attachment Points	Chest and hip D-rings
Size SM	Height 5'2" to 5'7", Weight 120 to 155 lb, Chest 30 to 40", Waist 30 to 38"
Size MD	Height 5'7" to 5'11", Weight 150 to 185 lb, Chest 34 to 44", Waist 32 to 40"
Size LG	Height 5'11" to 6'2", Weight 180 to 210 lb, Chest 38 to 48", Waist 34 to 42"
Size XL	Height 6'2" to 6'5", Weight 195 to 240 lb, Chest 40 to 50", Waist 38 to 46"
Warranty	5-year warranty
MPN	208.1110.006