-
DiveCatalog DIN Cap for 1st Stage (Female) for Scuba Diving Tanks - Scuba Essentials
$19.95$2.00
1 -
DiveCatalog Hose Clamp for Scuba Diving - Scuba Essentials
$17.95$1.80
1 -
DiveCatalog Neoprene Mask Strap Cover
$17.00$1.70
1 -
DiveCatalog Silicone Mouthpiece Replacement w/ installation - Scuba Essentials
$14.95$1.50
1 -
DiveCatalog Rubber Tank Valve Protector for Scuba Diving Tanks - Scuba Essentials
$11.95$1.20
1
-
DiveCatalog Fin Strap and Scuba Dive Accessory Holder Scuba Accessory Essentials
$9.95$1.00
1 -
DiveCatalog Female Quick Release Clip with Bungee cord for Scuba Accessory Essentials
$8.99$0.90
1 -
DiveCatalog.com Scuba Mouthpiece Cover
$7.95$0.80
1 -
DiveCatalog Scuba Essentials - PVC Tank Valve Protector for Scuba Diving Tanks
$5.95$0.60
1 -
Multi-Purpose Clip with Male and Female Quick Release Clip and Bungee Cord Scuba Accessory Essentials by DiveCatalog
$5.95$0.60
1 -
Whistle with Lanyard in Orange by DiveCatalog
$5.00$0.50
1 -
DiveCatalog.com Stainless Steel 2 Inch Webbing Keeper with Serrated Teeth Weights
$1.95$0.20
1 -
DiveCatalog.com Weight Keeper Stopper - Black
$1.45$0.15
1
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The SeaLife O-Ring for Digital Pro Flash is a replacement O-ring and gasket set (SKU SL9614) designed to restore the waterproof seal on the battery and cable door of the SeaLife Digital Pro Flash (SL961). SeaLife recommends replacing this O-ring and gasket annually and states that neither part should ever be lubricated.
Who it is for
This kit is for SeaLife Digital Pro Flash (SL961) owners who need to perform routine maintenance on their flash's waterproof door seal. Underwater photographers who dive regularly should inspect the O-ring and gasket before every trip, and this replacement set is the correct part to use once the originals show wear, cuts, or debris that cannot be cleaned off.
Key details
- Replacement O-ring and gasket set built specifically for the SeaLife Digital Pro Flash (SL961)
- SKU SL9614, barcode 077068996149
- Do not lubricate the O-ring or gasket; install the O-ring into its groove and position the gasket with its grooved side against the waterproof door
- Inspect for cuts, tears, scratches, or trapped debris before each use; minor molding seams near the hinges are normal and not a defect
- Clean with a moist, clean cotton cloth to remove hair, sand, and other debris, and never stretch either part
- Weight: 0.1 lbs; dimensions: 7 x 4 x 1 inches
Compatibility and sizing
This O-ring and gasket set is compatible only with the SeaLife Digital Pro Flash (SL961). When servicing the flash, grab the white cable adapter rather than the wire itself to disconnect or reconnect, and make sure the cable is not trapped under the waterproof door when closing it, since this prevents a proper seal.
DiveCatalog.com is an authorized SeaLife dealer and a dive shop in Irvine, California, open since 2003. Call 888-701-4017 or chat with us if you have questions about fit, installation, or compatibility with your Digital Pro Flash.
- Direct replacement: O-ring and gasket set made specifically for the SeaLife Digital Pro Flash (SL961).
- No lubrication: The O-ring and gasket must never be lubricated.
- Correct installation: Install the O-ring into its groove and position the gasket with its grooved side against the waterproof door.
- Pre-dive inspection: Check for cuts, tears, scratches, or debris before each use; small molding seams near the hinges are normal.
- Gentle cleaning: Use a moist, clean cotton cloth to remove hair, sand, and other debris, and never stretch the O-ring or gasket.
- Safe disconnection: Grab the white cable adapter, not the wire, when disconnecting or reconnecting during servicing.
- Sealing care: Avoid trapping the cable under the waterproof door when closing it, which prevents a proper seal.
- Annual replacement: SeaLife recommends replacing the O-ring and gasket every year.
| Brand | SeaLife |
| Product type | Camera accessory, replacement O-ring and gasket set |
| Compatible model | SeaLife Digital Pro Flash (SL961) |
| SKU | SL9614 |
| Barcode (UPC) | 077068996149 |
| MPN | 77068996149 |
| Weight | 0.1 lbs |
| Dimensions | 7 x 4 x 1 inches |
| Lubrication | Do not lubricate the O-ring or gasket |
| Recommended replacement interval | Annual |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
Can I lubricate the O-ring on the SeaLife Digital Pro Flash?
No. SeaLife specifically states that the O-ring and gasket for the Digital Pro Flash (SL961) must never be lubricated.
How often should I replace the O-ring on my Digital Pro Flash?
SeaLife recommends replacing the O-ring and gasket on the Digital Pro Flash (SL961) annually. You should also inspect it before every use for cuts, tears, scratches, or trapped debris, and replace it sooner if you find any damage that cleaning cannot fix.
Will this O-ring fit other SeaLife flashes or cameras?
No. This O-ring and gasket set, SKU SL9614, is made specifically for the SeaLife Digital Pro Flash (SL961) and is not listed as compatible with other SeaLife flash or camera models.
What is included in the SL9614 O-ring kit?
The SL9614 kit includes a replacement O-ring and a matching gasket sized for the battery and cable door of the SeaLife Digital Pro Flash (SL961). SeaLife's product page does not list any additional tools or accessories included with this set.
