Apeks WTX-D30 Complete BCD S/S Black/Grey UV

A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.

Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.

Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.

Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.

Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.

A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.

Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.

The kit arrives fully assembled and includes the WTX-D30 wing, a stainless steel backplate, a deluxe webbed harness with a stainless steel hardware kit, 2 x Griplock tank bands and 2 x book screws. Because it is supplied as a complete system, you do not need to buy the plate, harness or cylinder bands separately to start diving a backplate and wing setup.

A donut wing is an oval air cell that forms a continuous loop, keeping air from shifting dramatically from side to side. That continuous loop prevents air from shifting dramatically from side to side, which promotes stability and buoyancy control. On the WTX-D30 the cylinder sits deep inside the wing, which improves trim.

No. The WTX-D30 is optimized for single-cylinder diving, so it works for recreational dives as well as technical ones. Donut wings were originally developed for technical diving but are now widely used by recreational divers who want the stability, simplicity and modularity of a backplate and wing. The harness is not permanently bonded to the wing, so the setup can evolve with your diving.

Yes. The WTX-D30 belongs to the Apeks WTX collection, which means the wing, harness, plate and accessories are interchangeable within that system. Apeks also lists an aluminium plate version of this kit as a separate item. Contact DiveCatalog if you want help confirming which WTX parts fit together.