Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Mares Razor Apnea Dive Fins are a full-foot apnea fin built around a 65 cm blade made from pre-impregnated fiberglass layers. Designed for divers who want a long, efficient paddle blade in a full-foot pocket rather than an open-heel, strap-on setup.
Who it is for
These fins suit freedivers and apnea divers who want a single, long fiberglass blade. The full-foot Razor pocket is meant to be worn with a thin neoprene sock.
Key details
- Blade is 20.5 cm wide and 65 cm long, built from pre-impregnated fiberglass layers.
- Variable blade thickness delivers a parabolic flexion pattern, and variable side ribs support and optimize channel thrust and flex.
- Blade sits at a 22 degree inclination relative to the foot pocket.
- Available with a Soft or Medium strength white blade.
- Weight is 1085 g in the EU 42/43 foot pocket size.
Compatibility and sizing
The Razor full-foot pocket is designed to be worn with a 3 mm neoprene sock. Mares publishes foot pocket sizing from EU 39/40 up to EU 47/48, matching the 39, 41, 43, 45 and 47 options offered on this listing; for barefoot use without a sock, Mares recommends ordering one size smaller than your actual foot size.
What's in the box
- Mares Razor Apnea fins, Soft or Medium blade
- Fin protection bag
DiveCatalog.com is an authorized Mares dealer and a dive shop in Irvine, California, serving divers since 2003. Call or chat with our team if you have questions about foot pocket sizing, sock thickness or blade strength before you order.
- Pre-impregnated fiberglass blade: The blade is produced with pre-impregnated fiberglass layers for consistent, high-quality construction.
- Parabolic flexion: Variable blade thickness creates a high-performing parabolic flex pattern through the kick cycle.
- Long blade dimensions: The blade measures 20.5 cm wide and 65 cm long.
- Variable side ribs: New variable side ribs support and optimize channel thrust and flex.
- Blade inclination: The blade sits at a 22 degree angle relative to the foot pocket.
- Choice of blade strength: Available with a Soft or Medium strength white blade.
- Full-foot pocket: The Razor foot pocket is designed to be worn with a 3 mm neoprene sock.
- Barefoot sizing guidance: For barefoot wear, Mares recommends sizing one size smaller than your actual foot size.
- Protective bag included: A fin protection bag ships with the fins.
| Code | 420410 |
| Blade Length | 65 cm |
| Blade Width | 20.5 cm |
| Blade Material | Pre-impregnated fiberglass layers |
| Blade Inclination | 22 degrees relative to foot pocket |
| Blade Strength Options | Soft, Medium |
| Blade Color | White |
| Weight (EU 42/43) | 1085 g |
| Foot Pocket Type | Full foot |
| Foot Pocket Sizing Range | EU 39/40 to EU 47/48 |
| Recommended Sock Thickness | 3 mm neoprene sock |
- Mares Razor Apnea fins, Soft or Medium blade
- Fin protection bag
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
What is the difference between open-heel and full-foot fins?
Open-heel fins have an adjustable heel strap and are worn with dive boots, which protect your feet on shore entries and add warmth. Full-foot fins slip on like a shoe against bare skin or a thin sock, and are typically lighter and easier to pack. Most scuba divers choose open-heel fins with boots, while full-foot fins suit warm water, snorkeling, and pool use.
How should scuba fins fit?
Open-heel fins should be sized around the boots you will actually wear, snug with the strap set so your heel stays seated and your foot does not slide forward in the pocket. Full-foot fins should fit like a firm shoe, with no heel lift, no pinched toes, and no gap that lets water pump in and out. Too loose causes heel blisters and lost fins in current, and too tight causes foot cramps.
Should I buy dive boots before fins?
Choose your boots first and size open-heel fins around them, because sole thickness changes the foot-pocket size you need. A thin warm-water boot and a thick cold-water boot with a rugged sole can easily be a fin size apart. If you already own fins, bring them along when you buy boots so you can check the combination.
Are spring straps worth it?
Spring straps replace the adjustable rubber strap with a stainless spring that stretches on and off, so there is nothing to buckle with cold or gloved hands and no rubber strap to perish and snap mid-dive. They hold constant tension, which many divers find more comfortable and consistent. They are sized rather than adjustable, so match the length to your foot pocket and the boots you dive.
What are the best fins for travel?
For travel, length and weight matter most, so shorter blades and travel-specific open-heel or full-foot models pack more easily and save baggage allowance. Some fins have removable blades or compact foot pockets designed for luggage. Pack fins along the outside walls of your bag, where they also act as protection for softer gear.
What is the difference between paddle and split fins?
Paddle fins use a solid blade that transfers power directly, which many divers prefer for precision, control in current, and non-flutter kicks such as the frog kick. Split fins have a slit down the blade that lets water pass through, which generally makes flutter kicking easier on the legs but gives up some control and works less well with other kick styles. Neither is inherently better, so let your kick style, leg strength, and conditions decide, and try both if you get the chance.
How do I care for dive fins?
Rinse them in fresh water after each dive day, paying attention to buckles, springs, and strap channels where salt collects, and dry them out of direct sunlight. Store them flat or hanging from the foot pocket rather than standing on the blade tips, which can take a permanent bend. Check straps, buckles, and any screws before every trip, since a failed buckle is the most common fin problem.
What material is the Mares Razor Apnea fin blade made from?
The Razor Apnea blade is produced with pre-impregnated fiberglass layers, which Mares combines with variable blade thickness and side ribs to create a parabolic flex pattern. The blade is offered in a white finish in either Soft or Medium strength, and it measures 20.5 cm wide by 65 cm long.
What size should I order for the Mares Razor Apnea foot pocket?
Mares publishes Razor foot pocket sizes from EU 39/40 up to EU 47/48, matching the 39, 41, 43, 45 and 47 options available on this fin. The pocket is designed for use with a 3 mm neoprene sock; if you plan to dive barefoot without a sock, order one size smaller than your actual foot size.
Does the Mares Razor Apnea come with a protective bag?
Yes, a fin protection bag is included with the Razor Apnea fins.












