OMS Dive Gear Stainless Steel Backplate w/ SmartStream Harness SIG, Crotch Strap, Back Pad w/ Weight pockets, 6 lb system, (1) Utility Pocket and Shoulder Pads Style SS
In stock — ships from Irvine, CA
OMS Dive Gear Stainless Steel Backplate w/ SmartStream Harness SIG, Crotch Strap, Back Pad w/ Weight pockets, 6 lb system, (1) Utility Pocket and Shoulder Pads Style SS is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at 23D
OMS Dive Gear Stainless Steel Backplate w/ SmartStream Harness SIG, Crotch Strap, Back Pad w/ Weight pockets, 6 lb system, (1) Utility Pocket and Shoulder Pads Style SS is backordered and will ship as soon as it is back in stock.
You May Need These
Description
Description
Unmatched Diving Comfort
The SmartStream harness was designed to alleviate configuration challenges that may arise while donning a heavy rig. Pulling the waist straps forward secures the shoulder straps to the diver's shoulders and back, instantly achieving proper adjustments. This unique OMS system allows the use of OMS weight pockets or a place to hold a canister light.
Highly Adjustable and Durable Design
This updated harness uses 11.5 ft (3.5m) of 2" (5.1cm) nylon webbing materials and 316 stainless Steel D-rings with weight stops. Two at chest level and one on the waist can be easily re-positioned for optimal configuration with an OMS SS buckle. A 2" (5.1) sewn crotch strap with a 2" (5.1 cm) DPV D-ring is also included.
Backplate and Harness Features
The backplate boasts a superior de-burring process and a design that eliminates sharp edges, preventing abrasion & cuts to webbing and BC's. It is made from corrosion-resistant aluminum and weighs 5 lbs (2.3kg) SS / 1.75 lbs (794 g) AL.
Features
Features
- SmartStream technology for easy configuration
- Adjustable and durable 2" nylon webbing materials
- 316 Stainless Steel D-rings with weight stops
- Corrosion-resistant aluminum backplate
- Superior comfort and flexibility
Specifications
Specifications
| Material | Aluminum, Stainless Steel, Nylon |
| Weight | 5 lbs (2.3kg) SS / 1.75 lbs (794 g) AL |
| Webbing Length | 11.5 ft (3.5m) |
| Webbing Width | 2" (5.1cm) |
| D-ring Material | 316 Stainless Steel |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How should a scuba BCD fit?
A BCD should fit snugly enough that it does not ride up toward your ears when inflated, while still letting you breathe fully. Fasten the waist and cummerbund first, then adjust the shoulder straps so the tank sits close to your back and the shoulders cannot slide off. With the BCD fully inflated at the surface you should still be able to take a deep, comfortable breath; if it squeezes your chest, loosen it or move up a size.
How do I rinse and care for a BCD after diving?
Rinse the outside in fresh water and also flush the inside of the bladder, because salt water gets in through the inflator and dump valves. Fill the bladder roughly a third full of fresh water through the oral inflator, slosh it around, then drain it out through the inflator and each dump valve. Hang it to dry out of direct sunlight and store it partially inflated so the bladder walls do not stick together.
Should I use integrated weights or a weight belt?
Integrated weight pockets carry the lead in the BCD itself, which many divers find more comfortable and easier on the hips, while a weight belt keeps the weight independent of your BCD. Either way, you must be able to release your ditchable weight quickly with one hand, and your buddy should know how your system releases. Non-ditchable trim pockets are useful for balance but should never hold weight you might need to drop.
How do I pack a BCD for travel?
Make sure the BCD is completely dry inside and out before packing so it does not mildew in transit. Remove all weights, deflate it fully, and fold or roll it around softer items such as a wetsuit to cushion the inflator and valves. Avoid hard creases in the air cell, and unpack and air it out as soon as you arrive.
When does a BCD need to be serviced?
Follow the service interval in the manufacturer's manual, which is commonly an annual inspection alongside the rest of your life-support gear. Have the inflator, dump valves, and bladder checked any time the inflator sticks, free-flows, feels rough, or the BCD holds air poorly. Between services, confirm that it inflates and deflates properly as part of every pre-dive check.
What is the difference between a jacket-style and a back-inflate BCD?
A jacket-style BCD holds air in panels that wrap around your sides as well as your back, while a back-inflate BCD keeps the entire air cell behind you. Jacket styles tend to feel very stable and upright at the surface, and back-inflate styles keep the chest clear and are often preferred for horizontal trim underwater. Neither is objectively better, so treat it as a fit and preference decision and try both if you can.
Will my BCD fit any scuba tank?
Most recreational BCDs use an adjustable cam band sized for common single-cylinder diameters, so standard aluminum and steel tanks generally work. Re-check the band tension after the first wetting, because webbing can relax slightly and let the tank shift. If you dive doubles or unusual cylinder diameters, confirm compatibility with the manufacturer before assuming it will hold.
