Apeks XL4 OCEA Dive Regulator
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Apeks XL4 OCEA Dive Regulator - YOKE / Black Grey is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Save with Open Box or Used Purchase
Save with a package
Ready-made packages that include this item
Product Information
Apeks XL4 OCEA Dive Regulator is a 1st and 2nd stage scuba regulator set built from recycled materials and bio-plastics in a solar-powered facility, using the proven Apeks DS4 platform with an over-balanced diaphragm first stage. It is designed around the XL4+ platform and removes five times its own weight in plastic from the environment.
Who it is for
The XL4 OCEA suits divers who want a reliable, full-featured regulator set for a range of conditions, from reef dives to deeper wreck exploration. The compact, lightweight second stage is built to improve comfort and help reduce jaw fatigue on long-duration dives, and the braided nylon hose is suited to cold water use.
Key details
- Compact machined one-piece first stage body on the Apeks DS4 platform with an over-balanced, environmentally sealed diaphragm design
- 2 high-pressure ports (7/16" UNF) and 4 medium-pressure ports (3/8" UNF)
- Weight: 905 grams (2 lb) for the DIN version, 1,041 grams (2.3 lb) for the Yoke version
- Pneumatically balanced, lever-operated second stage with an average overall work of breathing (WOB) of 0.90 joules per liter
- Comfo-bite mouthpiece with a reusable mouthpiece clip and a flexible rubber exhaust tee
Compatibility and sizing
The XL4 OCEA is available with either a DIN or a Yoke first stage connection, and in Black Grey or Mint color options, giving four total configurations to match tank valve type and color preference.
DiveCatalog.com is an authorized Apeks dealer and a dive shop in Irvine, California, serving divers since 2003.
- Eco-conscious construction: Built from recycled materials and bio-plastics in a solar-powered facility, removing five times its weight in plastic from the environment.
- DS4-based first stage: Compact machined first stage based on the expedition-tested Apeks DS4 platform.
- Over-balanced diaphragm: As the diver descends, medium pressure gas in the hose increases at a faster rate than ambient pressure for performance at depth.
- Port configuration: 2 high-pressure ports and 4 medium-pressure ports.
- Comfort-focused second stage: Compact and lightweight design intended to improve comfort and reduce jaw fatigue on long-duration dives.
- Balanced poppet valve: High-performance pneumatically balanced, lever-operated poppet valve.
- Purge button: Large, over-molded, self-flushing and controllable purge button.
- Venturi lever: Ergonomic Venturi lever that is easy to use and locate.
- Braided hose: Flexible nylon braided hose with better cold water performance than a traditional rubber hose and a standard metallic hose connection for interchangeability.
- Comfo-bite mouthpiece: Unique bridge design that fits across the upper palate without requiring bite pressure to stay in place.
- Reusable mouthpiece clip: Makes it simple to change mouthpieces in the field.
- Exhaust tee: Durable, flexible rubber exhaust tee for bubble diversion.
| Connections | Yoke and DIN available |
| Type of first stage | Over-balanced diaphragm design, environmentally sealed |
| Body type | One piece machined body |
| Number of HP ports | 2 (7/16" UNF) |
| Number of MP ports | 4 (3/8" UNF) |
| Weight | DIN: 905g (2 lb), Yoke: 1041g (2.3 lb) |
| Environmental dry kit | Standard |
| First stage exterior | Satin |
| Cold water use | Yes |
| Type of second stage | Pneumatically balanced |
| Opening effort control knob | No |
| Integrated Venturi lever | Yes |
| Mouthpiece | Comfo-bite |
| Exhaust tee | Standard, one set |
| Heat exchanger for freezing resistance | Yes |
| Hose type | Braided Flexi-hose |
| Overall work of breathing (WOB) | Avg. 0.90 joules/liter |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
What makes the Apeks XL4 OCEA an environmentally conscious regulator?
It is built from recycled materials and bio-plastics in a solar-powered facility and removes five times its weight in plastic from the environment. The first stage is based on the proven Apeks DS4 platform, so the sustainable construction does not come at the cost of the regulator's core design.
What colors and connection types does the XL4 OCEA come in?
The Apeks XL4 OCEA is offered in Black Grey and Mint color options, and each color is available with either a DIN or a Yoke first stage connection, giving four total configurations so divers can match tank valve type and color preference.
How much does the Apeks XL4 OCEA regulator weigh?
The DIN version weighs 905 grams (2 lb) and the Yoke version weighs 1,041 grams (2.3 lb). Both share the same compact, one-piece machined first stage body with 2 high-pressure and 4 medium-pressure ports.
Does the XL4 OCEA second stage have a breathing effort adjustment knob?
No, the XL4 OCEA second stage does not include an opening effort control knob. It does have an ergonomic Venturi lever, positioned to be easy to use and locate, for adjusting airflow during the dive.





































