Apeks MTX-R Sidemount Set Imp Black/White
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Apeks MTX-R Sidemount Set Imp Black/White is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Apeks MTX-R Sidemount Set Imp Black/White is a two-regulator sidemount set built around the cold-water MTX-R platform, pairing two first stages configured for left and right sidemount cylinders with Comfo-bite second stages in an imperial gauge configuration.
Who it is for
This set is built for sidemount divers who need a dedicated first stage for each sidemounted cylinder, left and right, rather than a single-tank backmount regulator. The cold-water MTX-R platform and environmentally sealed first stages suit divers who want protection from silt and contaminants on the first stage.
Key details
- Two first stages configured specifically for left and right sidemount cylinders
- Environmentally sealed first stages that keep out silt and contaminants
- Second stages are pneumatically balanced and built with heat exchanger construction that resists freezing in cold water
- Second stages are supplied with sidemount-appropriate hose lengths
- Comfo-bite mouthpieces to reduce jaw fatigue
- Imperial gauge configuration, color Black / White
DiveCatalog.com is an authorized Apeks dealer and a dive shop in Irvine, California since 2003. Call 888-701-4017 or chat with us if you have questions about fit or compatibility for your sidemount configuration.
- Sidemount set built around the cold-water MTX-R platform.
- Two first stages configured for left and right sidemount cylinders.
- Second stages supplied with sidemount-appropriate hose lengths.
- Heat exchanger construction resists freezing in cold water.
- Environmentally sealed first stages keep out silt and contaminants.
- Comfo-bite mouthpieces reduce jaw fatigue.
- Imperial gauge configuration on this set.
| Brand | Apeks |
| Model | MTX-R Sidemount Set |
| Configuration | Sidemount, left and right first stages |
| First Stage | MTX-R, environmentally sealed, cold-water rated |
| Second Stage | Pneumatically balanced with heat exchanger |
| Mouthpiece | Comfo-bite |
| Units | Imperial |
| Color | Black / White |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
What cylinder setup is the Apeks MTX-R Sidemount Set designed for?
It is designed for sidemount diving, with two first stages configured specifically for left and right sidemount cylinders and second stages supplied with sidemount-appropriate hose lengths. This differs from a single backmount set, which uses only one first stage.
What does "Imp" mean in the Apeks MTX-R Sidemount Set name?
"Imp" refers to the imperial configuration of this set. The color configuration for this set is Black / White.
Is the Apeks MTX-R Sidemount Set built for cold water?
Yes, it is built around the cold-water rated MTX-R platform. The second stages use heat exchanger construction that resists freezing, and the first stages are environmentally sealed to keep out silt and contaminants.
What kind of mouthpiece comes on the Apeks MTX-R Sidemount Set?
The second stages are fitted with Comfo-bite mouthpieces, which are designed to reduce jaw fatigue during use.













