Apeks XL4 OCEA Octopus Dive Regulator
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Apeks XL4 OCEA Octopus Dive Regulator is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Save with a package
Ready-made packages that include this item
Save $281.55 (15% off)
Save $269.55 (15% off)
Save $209.55 (15% off)
Save $141.55 (10% off)
Save $200.55 (15% off)
Save $105.55 (9% off)
Product Information
The Apeks XL4 OCEA Octopus Dive Regulator is a backup second stage built on Apeks' Ocea platform, using lead-free brass construction and a pneumatically balanced, lever-operated poppet valve, with an average work of breathing rating of 0.90 joules per liter.
Who it is for
Divers who want a dedicated backup second stage to carry alongside a primary regulator will find the compact, lightweight second stage body designed to reduce jaw fatigue over long duration dives. The reusable mouthpiece clip lets a diver swap mouthpieces in the field, and the braided hose is built for cold water performance.
Key details
- High-performance pneumatically balanced, lever-operated poppet valve
- Large, over-molded, self-flushing and controllable purge button
- Ergonomic Venturi lever
- Flexible nylon braided hose with a standard metallic hose connection for interchangeability
- Comfo-bite mouthpiece with a bridge that fits across the upper palate without requiring bite pressure
- Durable, flexible rubber exhaust tee for bubble diversion
- Rated for cold water use with a heat exchanger for freezing resistance
- Average work of breathing (WOB): 0.90 joules per liter
Compatibility and sizing
This second stage uses a standard metallic hose connection for interchangeability.
DiveCatalog.com is an authorized Apeks dealer and a dive shop in Irvine, California, open since 2003. Call 888-701-4017 or start a chat if you have questions about fit or compatibility with your current setup.
- Lightweight second stage: Compact and lightweight second stage improves comfort and helps reduce jaw fatigue on long duration dives.
- Balanced poppet valve: High-performance pneumatically balanced, lever-operated poppet valve.
- Self-flushing purge button: Large, over-molded, self-flushing and controllable purge button.
- Ergonomic Venturi lever: Easy to use and locate.
- Cold-water braided hose: Flexible nylon braided hose has better cold water performance than a traditional rubber hose.
- Standard hose connection: Metallic hose connection for interchangeability.
- Comfo-bite mouthpiece: Unique bridge fits across the upper palate and does not require bite pressure to stay in place.
- Field-swappable mouthpiece: Reusable mouthpiece clip makes it simple to change mouthpieces in the field.
- Bubble diversion: Durable and flexible rubber exhaust tee provides excellent bubble diversion.
- Lead-free brass construction: Made with lead-free brass that is stronger than standard brass and can be endlessly recycled.
| Type of second stage | Pneumatically balanced |
| Mouthpiece | Comfo-bite |
| Exhaust tee | Standard, one set |
| Hose type | Braided Flexi-hose |
| Heat exchanger for freezing resistance | Yes |
| Cold water use | Yes |
| Integrated Venturi lever | Yes |
| Opening effort control knob | No |
| Overall work of breathing (WOB) | Avg. 0.90 joules per liter |
| Materials | Lead-free brass, recyclable |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
What is the Apeks XL4 OCEA octopus made from?
It is made with lead-free brass that is stronger than standard brass and can be endlessly recycled. The Ocea line is manufactured in a solar-powered facility, and each purchase funds the collection of 5 kg of up-stream plastic waste through a partnership with Plastic Bank.
Is the XL4 OCEA octopus rated for cold water diving?
Yes, it is rated for cold water use. It includes a heat exchanger for freezing resistance and a flexible nylon braided hose, which the manufacturer states has better cold water performance than a traditional rubber hose.
What is the work of breathing rating on the XL4 OCEA octopus?
The second stage has an average work of breathing (WOB) score of 0.90 joules per liter, based on the manufacturer's listed specification for this pneumatically balanced, lever-operated poppet valve design.
Can I change the mouthpiece on this octopus myself?
Yes. It uses a Comfo-bite mouthpiece secured with a reusable mouthpiece clip, which makes it simple to change mouthpieces in the field.
















