Apeks Sidemount Dive Regulator Set
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Apeks Sidemount Dive Regulator Set is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Apeks Sidemount Dive Regulator Set pairs two Apeks XTX50 second stages with two Apeks DST first stages, giving sidemount divers two complete, independent regulators for use with separate tanks. The DST first stage uses an over-balanced diaphragm design, and each XTX50 second stage is pneumatically balanced for smooth breathing.
Who it is for
This set is built for sidemount diving, where a diver carries two tanks and needs two fully functional, independently routed regulators rather than a single first stage with an attached octopus. The rotating turret ports on each DST first stage let hoses be angled for the routing a sidemount configuration requires.
Key details
- Each DST first stage uses an over-balanced, diaphragm design so medium-pressure gas in the hose increases faster than ambient pressure as the diver descends.
- Each DST first stage has 2 HP ports and 4 MP ports on a rotating turret angled for hose routing.
- An environmental dry system keeps water out of the main spring chamber, helping prevent ice buildup and keeping out silt and contamination.
- Each XTX50 second stage is pneumatically balanced, uses large XTX purge buttons with a 2-stage progressive purge, a soft-touch venturi lever, and an easy-to-grip opening effort control knob.
- Molded parts are treated with an additive active against MRSA, E-Coli, bacteria, fungi, viruses, mold, yeast, and algae.
- A silicone exhaust valve and Comfo-bite mouthpiece are fitted to each second stage, and a patented heat exchanger surrounds the valve mechanism to dissipate cold from gas expansion while drawing in ambient water warmth.
DiveCatalog.com is an authorized Apeks dealer and has been a dive shop in Irvine, California since 2003. Call 888-701-4017 or start a chat if you have questions about fit or compatibility for your sidemount setup.
- DST first stage: Each regulator in the set uses the Apeks DST first stage.
- Over-balanced diaphragm design: As the diver descends, medium-pressure gas in the hose increases faster than ambient pressure, for performance at depth.
- Rotating turret ports: 2 HP ports and 4 MP ports on a rotating turret are angled for optimum hose routing.
- Environmental dry system: Keeps water out of the main spring chamber, preventing ice buildup and keeping out silt and contamination.
- Pneumatically-balanced second stage: Results in smooth, easy breathing.
- XTX purge buttons: Large and easy to operate, using a 2-stage progressive purge for added control.
- Large venturi lever: Soft touch rubber grip for easier operation, reduces grit ingress for smooth operation.
- Opening effort control knob: Easy-to-grip, keeps the diver in control.
- Antimicrobial molded parts: Treated with an additive active against MRSA, E-Coli, bacteria, fungi, viruses, mold, yeast, and algae.
- Silicone exhaust valve: Improves the breathing performance of the regulator.
- Comfo-bite mouthpiece: Designed to reduce jaw fatigue.
- Patented heat exchanger: Surrounds the valve mechanism, dissipates cold from gas expansion, and draws in ambient water warmth.
| First stage | DST, over-balanced diaphragm design |
| Port configuration | 2 HP ports and 4 MP ports on a rotating turret |
| Environmental seal | Environmental dry system over the main spring chamber |
| Second stage | Apeks XTX50, pneumatically balanced |
| Purge button | XTX purge button with 2-stage progressive purge |
| Venturi lever | Soft touch rubber grip, reduces grit ingress |
| Opening effort control | Easy-to-grip control knob |
| Antimicrobial treatment | Molded parts treated against MRSA, E-Coli, bacteria, fungi, viruses, mold, yeast, and algae |
| Exhaust valve | Silicone |
| Mouthpiece | Comfo-bite |
| Heat exchanger | Patented, surrounds valve mechanism |
| Regulators included | 2 (set configuration for sidemount diving) |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
How many regulators come in the Apeks Sidemount Dive Regulator Set?
The set includes two complete regulators, each pairing an Apeks DST first stage with an Apeks XTX50 second stage. This gives a sidemount diver two independent regulators, one for each tank, rather than a single first stage with an attached octopus.
What port configuration does the DST first stage have?
Each DST first stage has 2 high-pressure ports and 4 medium-pressure ports arranged on a rotating turret. The rotating turret lets the ports be angled for the hose routing a sidemount configuration requires.
What does the environmental dry system on this regulator do?
The environmental dry system keeps water out of the main spring chamber of the DST first stage. This helps prevent ice buildup in the chamber and keeps silt and other contamination from reaching the mechanism.
What is the purpose of the heat exchanger on the XTX50 second stage?
The patented heat exchanger surrounds the valve mechanism of the XTX50 second stage. It dissipates the cold produced by gas expansion while drawing in ambient water warmth, as part of the second stage's design.














