Apeks Egress Octopus Dive Regulator
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
Apeks Egress Octopus Dive Regulator is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Save with a package
Ready-made packages that include this item
Save $388.05 (15% off)
Save $235.20 (15% off)
Save $223.20 (15% off)
Save $166.20 (15% off)
Product Information
The Apeks Egress Octopus Dive Regulator is a compact alternate second stage built for sharing air with a buddy or serving as a backup if a primary regulator fails. It has a pneumatically balanced second stage, a 120 degree angle between the mouthpiece and hose, and a high-visibility yellow 36 inch braided flexi-hose, and it is compatible with EAN40 out of the box.
Who it is for
This octopus suits divers who want a dedicated, easy-to-find alternate air source for out-of-air emergencies with a buddy. The high-visibility yellow cover and hose make it quick to distinguish from the primary second stage, and it is suitable for warm water or cold water dives when paired with an environmentally sealed first stage.
Key details
- Pneumatically balanced second stage for consistent breathing across depths.
- 120 degree angle between the mouthpiece and hose for easier buddy breathing.
- Large purge button that works no matter which way the second stage is positioned, and is operable with gloved hands.
- Braided flexi-hose that adds flexibility and supports cold-water performance.
- Comfo-bite mouthpiece designed to reduce jaw fatigue.
- High-visibility yellow cover and 36 inch hose for quick identification in an emergency.
- Compatible with EAN40 out of the box.
Compatibility and sizing
The Egress Octopus is compatible with EAN40 out of the box and suitable for cold water when used with an environmentally sealed first stage.
DiveCatalog.com is an authorized Apeks dealer and a dive shop in Irvine, California, serving divers since 2003. Call 888-701-4017 or start a chat if you have questions about fit or compatibility with your existing regulator setup.
- Alternate air source: Compact octopus second stage designed as a backup for out-of-air situations.
- Pneumatically balanced: Delivers consistent breathing performance across depths.
- Large purge button: Operable with gloved hands and functions no matter which way it is positioned.
- High-visibility yellow cover and hose: Allows quick identification during an out-of-air emergency.
- Braided flexi-hose: Adds flexibility and supports cold-water performance.
- Comfo-bite mouthpiece: Designed to reduce jaw fatigue.
- EAN40 compatible: Works with nitrox blends up to 40 percent oxygen out of the box.
- 120 degree mouthpiece angle: Positions the hose and mouthpiece for easier buddy air sharing.
- Low profile design: Reduces drag and keeps the regulator close to the body.
| Brand | Apeks |
| Model | Egress Octopus |
| Product Type | Octopus / alternate air source |
| Second Stage | Pneumatically balanced |
| Hose | Braided flexi-hose, 36 inch |
| Mouthpiece | Comfo-bite |
| Color | High-visibility yellow |
| Gas Compatibility | EAN40 out of the box |
| Mouthpiece to Hose Angle | 120 degrees |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
How long is the hose on the Apeks Egress Octopus?
The Egress Octopus comes with a 36 inch, high-visibility yellow, braided flexi-hose. The length and bright color are meant to make it quick to spot and hand to a buddy during an out-of-air emergency, while the braided construction adds flexibility.
Can the Apeks Egress Octopus be used in cold water?
Yes, the Egress Octopus is suitable for cold water conditions when it is used with an environmentally sealed first stage. Its braided flexi-hose is also built to support cold-water performance.
What nitrox percentage can I use with the Apeks Egress Octopus?
The Egress Octopus is compatible with EAN40 out of the box, meaning it can be used with nitrox blends up to 40 percent oxygen without additional modification. Confirm your full regulator setup's documentation for any limits beyond this.
Why does the Egress Octopus have an angled mouthpiece?
The Egress Octopus has a 120 degree angle between the mouthpiece and hose, which is designed to make the second stage easier to hand off and breathe from when sharing air with a buddy.












