Aqualung Airsource Dive Regulator

Name: Aqualung Airsource Dive Regulator
Brand: AquaLung
SKU: RG147111
Price: 279.00 USD
Availability: InStock

AquaLung | SKU: RG147111

Refer & Earn

$279.00

Shipping calculated at checkout.

In stock — ships from Irvine, CA

Pickup available at In Store

Usually ready in 2 hours

Warranty

Click logo for additional details

Pick accessories — 90% off with your $250+ order

Start $501 pick $1252 picks

DiveCatalog Moldable Mouthpiece w/ installation for Regulators
$34.95$3.50

1
DiveCatalog.com Upside Down Drysuit Hanger w/ Regulator and Accessory Hooks
$29.95$3.00

1
DiveCatalog.com Universal Dive Gear Hanger with Accessory Arms fits Wetsuits, Drysuits, BCDs, Backpacks
$29.95$3.00

1
DiveCatalog.com Small Retractor
$24.95$2.50

1
DiveCatalog.com Heavy Duty Wetsuit and Drysuit Hanger with Extra Wide Shoulder Saver
$22.95$2.30

1

90% off applies automatically at checkout on orders of $250+ — or free for signed-in members. Not combinable with discount codes.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Product Information

The Aqua Lung Airsource Dive Regulator is a combination alternate air source and BCD power inflator that replaces a traditional octopus with a single unit mounted on the front of your BCD, where you can reach it immediately. It pairs a pneumatically balanced second stage with a breathable power inflator, and it detaches from its bayonet mount at the Trim Grip for travel.

Who it is for

This is for recreational divers who want their backup air source positioned where it cannot dangle, drag or go missing, and for divers who prefer to carry fewer hoses and less clutter on the front of the BCD. It suits traveling divers because the Airsource separates from the BCD at the Trim Grip and packs with the rest of the regulator set, and it is a good match for divers using over-balanced first stages, since the second stage is pneumatically balanced for consistent breathing throughout the dive.

Key details

Dual function: high-performance second stage plus BCD power inflator in one housing.
Pneumatically balanced second stage for consistent breathing effort through the dive.
Trim Grip in the middle of the flexi-hose dumps air from the BCD during ascent without removing the mouthpiece.
Lightweight flexi-hose that is softer and easier to pull to open the rapid exhaust valve, with clips and recessed areas to route the MP hose.
Soft-touch purge cover on the bottom of the housing to prevent accidental activation in strong currents.
Bayonet mount connection to the BCD for quick removal.

Compatibility and sizing

The Airsource attaches to a bayonet mount on the BCD and separates from that mount at the Trim Grip, so compatibility depends on your BCD's inflator and mount configuration. If you are not sure whether your BCD accepts the Airsource, contact us before ordering and we will check it with you. This item is supplied under part number RG147111.

DiveCatalog.com is an authorized AquaLung dealer and a real dive shop in Irvine, California since 2003. Call us at 888-701-4017 or start a chat if you have questions about BCD compatibility, hose routing or pairing the Airsource with your first stage.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

How is the Airsource different from a traditional octopus?

A traditional octopus is a separate second stage on its own hose, routed apart from the inflator. The Airsource replaces it by combining the second stage with your BCD power inflator in one unit mounted on the front of the BCD. That keeps the backup air source in a known position directly in front of you, removes a dangling hose and simplifies your front profile.

Can I still deflate my BCD while breathing from the Airsource?

Yes. The Trim Grip control sits in the middle of the flexi-hose and lets you dump air from the BCD during ascent without taking the mouthpiece out. The flexi-hose is lighter and softer, so pulling it to open the rapid exhaust valve takes less effort.

Will the Airsource fit my BCD?

The Airsource connects to a bayonet mount on the BCD, so fit depends on your BCD's inflator and mount setup. Because the manufacturer compatibility list is not published here, contact DiveCatalog.com with your BCD model and we will confirm whether the Airsource can be installed before you order. Call 888-701-4017 or use chat.

Is the Airsource practical for dive travel?

Yes. It separates quickly from its bayonet mount on the BCD at the Trim Grip, so you can remove it and pack it together with your complete regulator set instead of leaving it attached to the BCD.

86%

(1177)

(114)

(37)

(16)

(31)

Excellent wetsuit but will it crush quickly like other wetsuits?

I purchased a BARE 5mm Reactive wetsuit (open box), which was like new, to replace my 1.5 yr old BARE 5mm Velocity wetsuit which had collapsed to only 2.5mm after 3 diving trips (~100 dives). The Reactive wetsuit is well constructed and very flexible. I had to increase the size of the Reactive suit, as it was smaller than the BARE Velocity suit of the same size. Tremendous customer service by Dive Catalog to exchange the wetsuit for proper size. I hope the Reactive suit does not crush so quickly like my other wetsuits (BARE, Henderson, Pinnacle). Hoping that the new technology in this suit will keep me warm below the thermocline.

Perfectly Built

Best of the many many diver hangers in my life. Easily supports my steel-plated BCD, while still donned with all of my accessories. No cracks, bends, or dents. Has even supported my BCD w/ a steel 100 tank attached (not recommended, for safety purposes, though).

Will continue to use this hanger for the long-term. No brainer.

Go-to Dive Hanger

This is a must-have for every diver. It's the quintessential hanger for all dive gear in one small package.

DiveCatalog's "Quick Dry Multi Accessory Dive Gear Hanger for Boots, Gloves, Hood" is set at a great price for a great product. Versatile enough that I've purchased extra hangers to organize my BMX racing gear.

Must-have for divers and anyone looking to organize their adventurous outdoor activities equipment.

Solid Hanger w/ Tons of Options

Does it's job and then some. The added accessory arms gives you options for a multitude of storage solutions. Solid build, solid pricing, must have for owns of dive gear.

New to this hanger...Now I'm a believer

Used tons of dive hangers, but never an upside down hanger. Game-changer for me. Will now add more of these in the near-future.

With it's swivel head design, it can cram itself into my tight dive locker, while still donning a ton of gear.

DiveCatalog's "Upside Down Drysuit Hanger w/ Regulator and Accessory Hooks" is a great product with solid construction at an affordable price. All of that with Dive Catalog's customer support/satisfaction guarantee.

Brand	AquaLung
Model	Airsource
Type	Combination alternate air source and BCD power inflator
Second stage design	Pneumatically balanced
Recommended pairing	Over-balanced first stages
Purge	Soft-touch purge cover, bottom mounted
Deflate control	Trim Grip on flexi-hose, dumps air from the BCD without removing the mouthpiece
Hose	Lightweight soft flexi-hose with MP hose clips and recessed areas
BCD attachment	Bayonet mount, separates at the Trim Grip
Category	BCD accessory
Part number	RG147111
UPC	053242310000