DiveCatalog.com Stainless Steel 2 Inch Webbing Keeper with Serrated Teeth Weights
In stock — ships from Irvine, CA
This item is currently on backorder. Order now to reserve yours, and we will ship it as soon as it is back in stock.
DiveCatalog.com Stainless Steel 2 Inch Webbing Keeper with Serrated Teeth Weights is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 2 hours
DiveCatalog.com Stainless Steel 2 Inch Webbing Keeper with Serrated Teeth Weights is backordered and will ship as soon as it is back in stock.
-
DiveCatalog.com Quick Dry Multi Accessory Dive Gear Hanger for Boots, Gloves, Hood
$22.95$2.30
-
Nocturnal Lights Ball Joint Adapter for Underwater Ball Joint Arm Strobe and Lighting Systems
$19.99$2.00
-
Nocturnal Lights Buoyancy & Protective Sleeve for the SLX Underwater LED Lights
$19.99$2.00
-
Nocturnal Lights YS Arm Adapter for M700 Lights ADP.M7YS
$19.99$2.00
-
Nocturnal Lights Large Hand Mount with 1.75-2 Light Slot HM.LG
$19.99$2.00
-
Nocturnal Lights Medium Hand Mount with 1.385-1.625 Light Slot HM.MED
$19.99$2.00
-
Nocturnal Lights Small Universal Hand Mount with Two 1-1.25 Slots HM.SM
$19.99$2.00
-
DiveCatalog DIN Cap for 1st Stage (Female) for Scuba Diving Tanks - Scuba Essentials
$19.95$2.00
-
DiveCatalog Comfo-Bite Silicone Mouthpiece for Scuba Diving Regulators Black
$19.95$2.00
-
DiveCatalog Essentials - BCD and Regulator Hanger for Scuba Diving
$19.95$2.00
-
DiveCatalog Scuba Essentials - Wetsuit Hanger for Scuba Diving, Snorkeling, and Surfing
$19.95$2.00
-
Nocturnal Lights 45 Degree Ball Joint Adapter with T-base Slot BJADAPTER.TBASE45
$18.99$1.90
-
DiveCatalog.com Underwater Pointer Tool
$18.95$1.90
-
DiveCatalog Hose Clamp for Scuba Diving - Scuba Essentials
$17.95$1.80
-
DiveCatalog Neoprene Mask Strap Cover
$17.00$1.70
-
Nocturnal Lights 90 Degree Ball Joint Adapter with T-base Slot BJADAPTER.TBASE90
$15.99$1.60
-
Nocturnal Lights 2 YS Flex Arm Extra Short FLEXARM.YS2
$15.99$1.60
-
DiveCatalog.com Basic Black Silicone Snorkel
$14.95$1.50
-
DiveCatalog Silicone Scuba Octopus Mouthpiece with Color Tab & Regulator Tie – Comfortable, Leak-Free Dual Color
$14.95$1.50
-
DiveCatalog Silicone Mouthpiece Replacement w/ installation - Scuba Essentials
$14.95$1.50
-
DiveCatalog Rubber Tank Valve Protector for Scuba Diving Tanks - Scuba Essentials
$11.95$1.20
-
DiveCatalog.com Regulator Necklace
$11.95$1.20
-
DiveCatalog.com Water Activated LED Signal Light - Green
$11.95$1.20
-
DiveCatalog x Stream2Sea Mask Defog, Flip Cap Bottle, 2 oz
$9.95$1.00
-
DiveCatalog Fin Strap and Scuba Dive Accessory Holder Scuba Accessory Essentials
$9.95$1.00
-
DiveCatalog.com Dry Box with Lanyard
$9.95$1.00
-
DiveCatalog x Stream2Sea Mask Defog Spray, 2 oz
$9.95$1.00
-
DiveCatalog Female Quick Release Clip with Bungee cord for Scuba Accessory Essentials
$8.99$0.90
-
DiveCatalog.com Fin Holder
$7.95$0.80
-
DiveCatalog.com Scuba Mouthpiece Cover
$7.95$0.80
-
Multi-Purpose Clip with Male and Female Quick Release Clip and Bungee Cord Scuba Accessory Essentials by DiveCatalog
$5.95$0.60
-
DiveCatalog Scuba Essentials - PVC Tank Valve Protector for Scuba Diving Tanks
$5.95$0.60
-
Whistle with Lanyard in Orange by DiveCatalog
$5.00$0.50
-
Nocturnal Lights 7 Ultra Slim Underwater Camera Tray TRAY.SLIM5
$3.99$0.40
-
DiveCatalog.com Weight Keeper Stopper - Black
$1.45$0.15
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The DiveCatalog.com Stainless Steel 2 Inch Webbing Keeper with Serrated Teeth is a marine-grade stainless steel weight keeper sized for 2 in (50 mm) webbing, using serrated teeth that bite into the strap so weights and trim stay exactly where you set them on a harness or weight belt.
Who it is for
It is for divers running a backplate-and-webbing harness or a traditional weight belt who want weights and trim to stop sliding during a dive. Because the teeth resist slipping even under the load of heavier weights, it suits divers carrying larger lead blocks, those fine-tuning trim weight placement along the waist strap, and anyone who prefers a hardware-based solution over friction alone.
Key details
- Webbing size: built for 2 in (50 mm) webbing.
- Grip: serrated teeth bite into the webbing to resist slipping under load.
- Material: marine-grade stainless steel that resists corrosion in salt water.
- Profile: low-profile and durable, so it sits close to the strap.
- Use: holds weights or trim in position on a harness or belt.
Compatibility and sizing
This keeper is made for 2 in (50 mm) webbing only. Measure the width of your existing harness or belt webbing before ordering: this keeper is made for 2 in (50 mm) webbing only. SKU DC-WBT-KPR-SS-SERR.
DiveCatalog.com is an authorized DiveCatalog dealer and a real dive shop in Irvine, California since 2003. Call 888-701-4017 or start a chat if you want help confirming your webbing width or how many keepers your setup needs.
- Sized for 2 in webbing fits standard 2 inch (50 mm) harness and weight belt webbing.
- Serrated teeth grip the strap to resist slipping along the webbing.
- Holds weights in place keeps weights or trim positioned on a harness or belt.
- Marine-grade stainless steel resists corrosion in salt water.
- Grips under load teeth bite into the webbing to resist slipping even under the load of heavier weights.
- Low-profile design sits close to the strap for a clean, durable setup.
- Backplate and belt friendly works on backplate-and-webbing harnesses as well as traditional weight belts.
- SKU DC-WBT-KPR-SS-SERR serrated stainless steel webbing weight keeper.
| Brand | DiveCatalog.com |
| Product Type | Serrated webbing weight keeper |
| SKU | DC-WBT-KPR-SS-SERR |
| Material | Marine-grade stainless steel |
| Webbing Size | 2 in (50 mm) |
| Grip | Serrated teeth |
| Corrosion Resistance | Resists corrosion in salt water |
| Profile | Low-profile |
| Use | Holding weights or trim on a harness or weight belt |
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
What size webbing does this keeper fit?
It is built for 2 inch (50 mm) webbing. Measure your existing strap before ordering, and call 888-701-4017 if unsure.
Will it slip under heavier weights?
The serrated teeth are designed to bite into the webbing so the keeper resists slipping even under the load of heavier weights.
Is it suitable for salt water diving?
Yes. The keeper is made from marine-grade stainless steel, which resists corrosion in salt water. As with any stainless dive hardware, rinsing it with fresh water after ocean dives helps keep the serrated teeth and surfaces clean over the long term.
Can I use it on a backplate harness as well as a weight belt?
Yes. The keeper is intended for holding weights or trim in place on either a backplate-and-webbing harness or a traditional weight belt, as long as the webbing is 2 inch (50 mm) wide. Its low-profile shape keeps it close to the strap so it does not add bulk to the setup.
