Free 1-2 Day Shipping | Get up to 10% cashback | Need It Today? Same-Day Delivery Within 50 Miles

AKONA 6.5mm Standard Boots

Akona  |  SKU: AKBT361-12
Refer & Earn

Regular price $59.95
Shipping calculated at checkout.

In stock — ships from Irvine, CA


Size

Pickup available at In Store

Usually ready in 2 hours


Pick accessories — 90% off with your $50+ order

and your picks are free.

 

Start  $501 pick $1252 picks
  • DiveCatalog DIN Cap for 1st Stage (Female) for Scuba Diving Tanks - Scuba Essentials

    $19.95$2.00

    1
  • DiveCatalog Hose Clamp for Scuba Diving - Scuba Essentials

    $17.95$1.80

    1
  • DiveCatalog Neoprene Mask Strap Cover

    $17.00$1.70

    1
  • DiveCatalog Silicone Mouthpiece Replacement w/ installation - Scuba Essentials

    $14.95$1.50

    1
  • DiveCatalog Rubber Tank Valve Protector for Scuba Diving Tanks - Scuba Essentials

    $11.95$1.20

    1


Payment & Security

Payment methods

  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Save with Open Box or Used Purchase

Product Information

The Akona Standard 6mm Tall Boots are vulcanized-sole neoprene dive boots built with glued and blind stitched seams for a water-tight seal, a contoured and snug fit, and a YKK #5 self-locking, saltwater-resistant zipper. They are available in sizes 5 to 13 and carry the manufacturer part number AKBT361 followed by the size.

Who it is for

These boots suit divers who want a snug, contoured neoprene boot with a vulcanized sole and a secure, corrosion-resistant zipper closure. The full-length zipper pocket is designed to minimize water entry, and the extended heel pull-tab makes the boot easier to don.

Key details

  • 6mm neoprene thickness with an earth-friendly neoprene formulation
  • Vulcanized rubber sole
  • Glued and blind stitched seams using water-based glue, for a superior water seal
  • YKK #5 self-locking, saltwater-resistant zipper hardware, full length
  • Full-length zipper pocket to minimize water entry
  • Extended heel pull-tab for easier donning

Compatibility and sizing

Available in sizes 5, 6, 7, 8, 9, 10, 11, 12, and 13, with each size carrying its own part number (AKBT361-05 through AKBT361-13).

DiveCatalog.com is an authorized Akona dealer and a dive shop in Irvine, California since 2003. Call 888-701-4017 or chat with us if you have questions about sizing or fit before you order.

⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

What thickness of dive boots, gloves, or hood should I choose?

As a general rule, thicker neoprene insulates more, so colder water pushes you toward thicker accessories, but fit, dive length, and personal cold tolerance matter as much as the millimeter number. Divers commonly lose a great deal of heat through the head, so a hood is often the highest-value warmth upgrade for the money. Remember that every added piece of neoprene also adds buoyancy you will need to account for.

How should dive boots fit?

Boots should fit like a snug athletic shoe, with no heel lift and no crushed toes; a little water inside is normal, a sloshing pocket is not. Try them on with the socks you would actually dive, and remember your fin foot pocket has to accommodate the boot. Hard-sole boots protect on rocky shore entries, while soft-sole boots are lighter and pack smaller for boat and travel diving.

How should dive gloves fit?

Gloves should be snug across the palm with fingertips reaching the ends without bunching, since trapped air and loose fingertips destroy dexterity. Thicker gloves are warmer but make buckles, clips, and inflator buttons harder to operate, so choose the thinnest glove that keeps you comfortable in your conditions. Try working a clip or buckle while wearing them before you commit.

How should a dive hood fit?

A hood should seal around the face and neck without restricting your throat or jaw, and lie flat on your head without pulling the mask strap out of position. A loose hood flushes cold water continuously, while an overly tight one is distracting and uncomfortable. Many hoods have a vent to release air trapped during descent, so check yours and burp out any trapped air before you go down.

Why does new neoprene feel so tight?

New neoprene compresses and relaxes with use, so a boot, glove, or hood that feels firm out of the packaging usually settles slightly after a few dives. It should still be snug afterward rather than loose, because neoprene that stretches into a loose fit was probably oversized to begin with. Buy for a snug fit when new, but never for a fit that restricts circulation or breathing.

Do I need to change my weighting when I add a hood, gloves, and boots?

Yes, because every piece of neoprene you add is buoyancy, and a hood, boots, and thick gloves together can shift your weighting noticeably. Do a proper buoyancy check any time you change your exposure protection rather than assuming your usual weight still works. The weight-check procedure is covered in your training, and a dive professional can help you re-do it.

How do I care for dive boots, gloves, and hoods?

Rinse them inside and out in fresh water after every dive day, since they hold sweat and salt more than any other gear, and dry them fully inside-out before packing. Dry them out of direct sunlight and never on a heater, because heat hardens neoprene and weakens glued seams. Store them dry and unfolded, as damp neoprene sealed in a bag is how gear picks up a permanent smell.

Are these boots 6mm or 6.5mm thick?

Akona lists this boot as a Standard 6mm Tall Boot on its own product page, using the same part number (AKBT361) and full size run, 5 to 13, as this listing. Akona's own product page lists this boot as a Standard 6mm Tall Boot, while this listing's title says 6.5mm; the SKU and size run match.

What sizes are available for the Akona Standard 6mm Tall Boots?

These boots are available in sizes 5, 6, 7, 8, 9, 10, 11, 12, and 13, each with its own part number from AKBT361-05 through AKBT361-13. Choose based on your foot size and the fin foot pocket you plan to use them with.

What kind of zipper does this boot use?

It uses a YKK #5 zipper that is self-locking and saltwater resistant, running the full length of the boot. It also has a full-length zipper pocket that minimizes water entry.

  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
Anonymous
Comfortable booties

Comfortable booties. Work well