You May Need These
Description
Description
Scubapro Steel Comp Dive Mask is a dual-lens, frameless mask designed for deep, precise underwater exploration and freediving. Its ultra-low internal volume eases equalizing, while the mask compresses on descents to reduce the need for frequent adjustments. The frameless design pairs with a high-grade silicone skirt to deliver a comfortable seal, and rotating buckles with a micro-adjustable strap provide a secure, watertight fit. A compact profile suits smaller faces and divers with narrower features.
Ultra-clear, scratch-resistant lenses deliver distortion-free vision across underwater conditions, while the standard skirt tech and lightweight construction support a natural feel in the water. The mask's materials and design emphasize practical performance in scuba, diving, and underwater environments.
Note: As water pressure increases, the bridge between the lenses can bend slightly and squeeze the mask tighter to the face. The only noticeable indication is a brief change in vision as the eyes adjust. Because of this behavior, the Steel Comp is not recommended for scuba diving.
Features
Features
- Mask Type: Dual Lens
- Construction: Frameless
- Skirt Tech: Standard
- Materials: High-Grade Silicone
- Weight: 0.347 lb
- Activity: Freediving
- Prescription Lens Compatible: No
- Lens: Ultra Clear scratch-resistant glass for distortion-free vision
- Fit System: Rotating buckles with a micro-adjustable strap
- Size Note: Scaled-down size for smaller divers or narrow faces
- Usage Note: Not recommended for scuba diving due to lens-bridge squeeze under pressure
Specifications
Specifications
| Mask Type | Dual Lens |
| Skirt Tech | Standard |
| Prescription Lens Compatible | No |
| Materials | High-Grade Silicone |
| Construction | Frameless |
| Weight | 0.347 lb |
| Activity | Freediving |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How do I know if a dive mask fits?
Hold the mask against your face without using the strap, look slightly down, and inhale gently through your nose; a well-fitting mask holds itself in place for a few seconds. Check that the skirt seals all the way around without digging into the nose bridge, and that there are no gaps at the temples or above the upper lip. A mustache can break the seal even on an otherwise well-fitting mask.
Why does my brand new mask fog no matter what I do?
New masks carry a residue on the inside of the lens left over from manufacturing, and defog cannot stick to it, so the mask fogs until that film is removed. The standard pre-treatment is to scrub the inside of the lens with a mild abrasive cleaner or a dedicated mask prep and rinse thoroughly, repeating if it still fogs. Follow the mask manufacturer's instructions, particularly on coated or mirrored lenses.
How do I stop my dive mask from fogging?
Apply defog to a dry lens before the dive, spread it over the whole inner surface, then rinse briefly with water just before you put the mask on. Fogging happens when warm moist air meets a cooler lens, so a clean lens with a thin surfactant film is the fix. Keep sunscreen off your fingers before handling the inside of the lens, because that film fogs badly and is hard to remove.
Why do dive masks need tempered glass?
Dive mask lenses should be tempered safety glass because it resists scratching and, if it ever does break, fractures into blunt granules rather than sharp shards next to your eyes. Untempered or plastic lenses scratch easily and can craze, which is why tempered glass is standard on scuba masks. Look for the tempered marking etched on the lens.
Can I get a dive mask with my prescription?
Yes, prescription options are widely available, usually as masks fitted with stock corrective lenses in set diopter steps, custom-ground lenses installed in compatible frames, or bonded lenses added to an existing lens. Not every mask frame accepts replacement lenses, so check compatibility before you buy the frame. An optician or a dive shop can help translate your glasses prescription into a mask lens choice.
How should I care for and store a dive mask?
Rinse it in fresh water after each dive day and let it dry away from direct sunlight, avoiding anything abrasive on the treated inner lens. Store it in a rigid mask box so the skirt is never compressed or creased, since a set crease in the skirt is a permanent leak. Keep silicone skirts away from petroleum products and prolonged UV, both of which yellow and harden them.
How tight should a dive mask strap be?
Not tight at all in the usual sense, because over-tightening is the most common cause of both leaks and headaches; a hard-pulled strap distorts the skirt and lifts the seal off your face. The strap should sit high on the back of your head and be just firm enough to keep the mask from shifting. If you need it cranked down to stop a leak, the mask does not fit your face.
