Oceanic+ Underwater Housing for iPhone – Scuba Dive Computer & Camera in One (Retrofit Installed)
In stock — ships from Irvine, CA
Oceanic+ Underwater Housing for iPhone – Scuba Dive Computer & Camera in One (Retrofit Installed) is backordered and will ship as soon as it is back in stock.
Pickup currently unavailable at 23D
You May Need These
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Information
The Oceanic+ Dive Housing is a waterproof dive housing designed to convert a compatible iPhone into an underwater dive computer and dive camera when used with the Oceanic+ app. Engineered for scuba diving, snorkeling, and freediving environments, it enables underwater photo and video capture while simultaneously displaying real-time dive data including depth, time, temperature, and no-decompression information through the integrated Oceanic+ system.
Built for recreational scuba diving use, the Oceanic+ Dive Housing features a pressure-rated enclosure, integrated sensors, and mechanical controls that allow full operation of supported iPhone devices at depth. The system is designed to support underwater navigation of dive computer functions, photo capture, and automatic data logging within the Oceanic+ ecosystem.
- Oceanic+ Dive Housing designed to transform a compatible iPhone into an underwater dive computer and dive camera system
- Works with the Oceanic+ app for real-time dive tracking, dive planning, and underwater data logging
- Depth-rated waterproof dive housing designed for scuba diving, freediving, and snorkeling environments
- Maximum operating depth rated to 60 m / 196 ft for recreational scuba diving use
- Integrated depth, pressure, and temperature sensors for real-time dive computer data
- Built-in vacuum sealing system with leak detection to verify housing integrity before diving
- Mechanical directional control interface for underwater navigation of dive functions
- Bluetooth-enabled communication between housing system and iPhone for data synchronization and control
- Durable glass-fiber reinforced techno-polymer construction designed for impact resistance and underwater pressure conditions
- Optical front window designed for underwater photography and video capture with maintained clarity
- Rechargeable internal lithium battery with USB-C charging support
- Compatible with select iPhone models running iOS 18.1 and newer (including recent iPhone generations with retrofit kit support)
- Supports underwater photo and video capture with automatic color correction through Oceanic+ app processing
- Automatic dive log synchronization and GPS-based dive session tracking after surfacing
| Specification | Details |
|---|---|
| Product Type | Underwater dive housing for iPhone with integrated dive computer functionality |
| Application | Oceanic+ app (iOS) |
| Maximum Depth Rating | 60 m / 196 ft |
| Materials | Glass-fiber reinforced techno-polymer housing with optical front window |
| Power Source | Internal rechargeable lithium battery (USB-C charging) |
| Connectivity | Bluetooth communication with iPhone |
| Sensors | Depth, pressure, temperature, leak detection system |
| Control System | Mechanical directional pad interface for underwater operation |
| Compatibility | Select iPhone models running iOS 18.1 and newer (retrofit kit required for newer generations) |
- Oceanic+ Dive Housing unit
- Integrated control interface (built into housing)
- USB-C charging cable (as supplied by manufacturer)
- Wrist lanyard / retention strap (as included in manufacturer packaging)
- Thermoformed protective travel case
- User documentation and setup guide
⚠️ WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How do I check an underwater housing's seal before a dive?
Before every dive, open the housing somewhere clean and dry, inspect and wipe the main o-ring and its groove, and close it with nothing trapped in the seal, because a single hair or grain of sand is enough to flood it. Confirm every latch is fully closed and that any vacuum or leak alarm reads correctly. Where you can, soak the sealed housing in a rinse tank or hang at the surface before descending, so a leak shows up before depth.
How do I care for housing o-rings?
Remove the main o-ring regularly with a plastic tool rather than anything metal, which can nick the groove, and clean both the o-ring and the groove with a lint-free cloth. Apply a thin film of the silicone grease the manufacturer specifies, since grease helps the o-ring seat and slide rather than sealing by itself, and a thick coat only collects grit. Replace o-rings on the schedule in the manual, or sooner if they look flattened, cut, or dry.
What do moisture alarms and desiccant packs do?
A moisture alarm is a sensor inside the housing that beeps or flashes when it detects water, giving you a chance to abort the dive before the camera is ruined. Desiccant packs absorb humidity in the air sealed inside the housing, which prevents the port fogging as you descend into cooler water. Neither replaces a proper seal check, since they provide early warning and fog control rather than leak prevention.
How deep can I take an underwater camera housing?
Only as deep as its rated depth, which the manufacturer sets and publishes in the specifications, and it should never be exceeded even briefly. Depth ratings assume a housing in good condition with intact seals, so worn o-rings or a damaged port reduce the real margin. If your diving might take you deeper, choose a housing rated comfortably beyond your planned maximum depth.
Can I use a phone housing for scuba diving?
Only if the housing is specifically rated for the depth you plan to dive, because many phone cases are splash- or snorkel-rated rather than scuba-rated. Touchscreens generally do not respond underwater, so a diving phone housing needs mechanical buttons or another control method. A phone's own water-resistance rating is not a substitute for a housing, and any housing still needs seal checks and o-ring care.
How do I rinse a camera housing after diving?
Soak the closed, sealed housing in fresh water and work every button and dial while it is submerged so salt does not dry inside the control shafts. Let it dry completely, especially around latches and seams, before you open it, since opening a wet housing drips water straight onto the camera. Avoid opening a housing on a wet, moving boat deck whenever you have the option to wait.
What should I do if my housing floods?
Get the housing out of the water and open it somewhere dry, then immediately remove the camera's battery and memory card, because leaving a battery in a wet camera does more damage than the water itself. Do not power the camera on to check whether it still works. Dry everything gently away from direct heat, get salt-water-exposed equipment to a repair technician promptly, and inspect the housing to find which seal failed before you dive it again.
