You May Need These
Description
Description
The Mares Ultra 62X Dive Regulator delivers reliable performance for scuba diving with a lightweight, streamlined design. Crafted from ultralight technopolymer, it weighs just 190g, helping to minimize gear bulk during diving trips. The compact first stage features AST (Auto Sealing Technology) for a dry, ready-to-breathe system, and is EN 250 cold-water certified to ensure dependable operation in cooler conditions. Built to work seamlessly with standard scuba gear, this regulator focuses on comfort, durability, and steady performance under demanding conditions.
Designed for versatility in the water, the second stage offers a Twin Power System that lets divers choose between natural breathing and assisted breathing with increased air flow. It is suitable for cold-water use and uses a durable ultralight technopolymer body. A wide, pivoting purge button is easy to operate, even with thick gloves, and a lightweight Superflex hose adds comfort during long dives. MI labels provide a unique look without compromising performance, making this regulator a practical choice for divers who value dependable gear in the field.
Features
Features
- 2nd Stage: Twin Power System To Choose Between Natural Breathing And Assisted Breathing With Increased Air Flow
- Cold Water Use
- Second Stage Made In Ultralight, Durable Technopolymer
- Wide, Pivoting Purge Button Which Is Easy To Use, Even With Thick Gloves
- Lightweight Superflex Hose To Ensure Comfort During Use
- MI Labels For A Unique Look
- 1st Stage: Dfc LP Port For High Air Flow At Any Depth
- Ast - Auto Sealing Technology For A Dry First Stage
- En 250 Cold Water Certified
- Pre-Oriented LP And HP Ports
- The Most Compact And Lightweight Mares Diaphragm First Stage
- Material: Ultralight Technopolymer
- First Stage: Balanced Diaphragm
- HP Ports: 2 HP 7/16” UNF Ports
- LP Ports: 4 LP 3/8” UNF Ports
- First Stage Weight INT: 742g / 26.2oz
- First Stage Weight DIN 300: 525g / 18.5oz
- Second Stage Weight: 190g / 6.7oz
- Total Weight INT: 1068g / 37.7oz
- Total Weight DIN300: 851g / 30oz
Specifications
Specifications
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
