Mares Regulator Dual 2S Black
In stock — ships from Irvine, CA
Mares Regulator Dual 2S Black - Black / Din is backordered and will ship as soon as it is back in stock.
Pickup available at In Store
Usually ready in 1 hour
You May Need These
Description
Description
The Mares Regulator Dual 2S Black is a compact scuba regulator designed for reliable diving performance. The 2S first stage features piston control and a scratch-resistant sandblasted finish, helping it withstand rugged conditions. It also includes a dedicated RFID chip holder for service history tracking, reflecting precision engineering in every component.
The dual second stage is built from ultra-lightweight technopolymer for durability and a balanced breathing feel. Vortex Assisted Design (VAD) with a curved bypass supports smooth airflow, while a large purge button stays accessible even with thick gloves for easier operation in real-world diving scenarios.
Features
Features
- 2S First Stage: Compact design with a scratch-resistant sandblasted finish for lasting durability.
- Piston control and a dedicated RFID chip holder for precise performance and easy tracking.
- Dual Second Stage: Constructed from ultra-lightweight, ultra-strong technopolymer for durability and performance.
- Vortex Assisted Design (VAD) with a curved bypass for smooth, uninterrupted airflow and natural breathing at any depth.
- Large purge button for easy operation, even when wearing thick gloves, enhancing user-friendliness.
- Specifications: Material Ultralight Technopolymer; Finish Sandblasted; First Stage Weight (INT) 608 g / 21.4 oz; First Stage Weight (DIN) 440 g / 15.5 oz; Second Stage Weight 182 g / 6.4 oz; Total Weight (INT) 921 g / 32.5 oz; Total Weight (DIN) 753 g / 26.6 oz; High Pressure Ports 1 HP 7/16 UNF Port; Low Pressure Ports 4 LP 3/8 UNF Ports; Hose Type Superflex Hose; Hose Length 75 cm.
Specifications
Specifications
| Material | Ultralight Technopolymer |
| Finish | Sandblasted |
| First Stage Weight (INT) | 608 g / 21.4 oz |
| First Stage Weight (DIN) | 440 g / 15.5 oz |
| Second Stage Weight | 182 g / 6.4 oz |
| Total Weight (g) INT | 921 g / 32.5 oz |
| Total Weight (DIN) | 753 g / 26.6 oz |
| High Pressure Ports | 1 HP 7/16” UNF Port |
| Low Pressure Ports | 4 LP 3/8” UNF Ports |
| Hose Type | Superflex Hose |
| Hose Length | 75 cm |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.
