You May Need These
Description
Description
The Mares SXS 62X Regulator is a compact, ultra-lightweight piece of scuba diving gear designed for a streamlined, reliable setup. Its Second eXtra Small (SXS) 62X second stage provides a minimal profile without sacrificing performance, making it well suited for side configurations in diving gear.
The first stage uses a balanced diaphragm with pre-oriented HP and LP ports for clean hose routing, complemented by A.S.T. for a watertight seal and a lighter, more compact diaphragm finished in pearl chrome. The SXS second stage is the smallest Mares second stage, built from ultralight technopolymer, featuring a V.A.D. system with a curved bypass tube for maximum airflow, and it can be used on either the right or left side with a lateral exhaust tube, a soft exhaust button, and a Superflex hose.
Technical specifications and materials support a dependable scuba diving gear setup, including port counts, weights, and overall design intended for smooth performance at depth.
Features
Features
- Materials: Ultralight Technopolymer for the regulator body and second stage
- First Stage: Balanced Diaphragm
- HP Ports: 2 HP 7/16" UNF Ports
- LP Ports: 4 LP 3/8" UNF Ports
- Pre-oriented Ports: LP and HP ports designed for clean routing
- A.S.T.: A.S.T. for a watertight first stage
- First Stage Weight (INT): 742g / 26.2oz
- First Stage Weight (DIN 300): 525g / 18.5oz
- Second Stage Weight: 156g / 5.5oz
- Total Weight (INT): 1028g / 36.3oz
- Total Weight (DIN300): 811g / 28.6oz
- Second Stage: Smallest Mares second stage, ultralight technopolymer
- Airflow: V.A.D. system with curved bypass tube for maximum airflow
- Configuration: Right- or left-side compatibility
- Exhaust: Lateral exhaust tube for visibility in all diving positions
- Exhaust Button: Easy-to-use soft exhaust button
- Hose: Superflex hose
Specifications
Specifications
- Material : Ultralight Technopolymer
- First Stage : Balanced Diaphragm
- HP Ports : 2 HP 7/16" UNF Ports
- LP Ports : 4 LP 3/8" UNF Ports
TECHNICAL SPECIFICATION
- First stage weight INT : 742g / 26.2oz
- First stage weight DIN 300 : 525g / 18.5oz
- Second stage weight : 156g / 5.5oz
- Total weight INT : 1028g / 36.3oz
- Total weight DIN300 : 811g / 28.6oz
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
How often does a scuba regulator need servicing?
Follow the interval in your regulator's manual, since manufacturers commonly specify an annual inspection or a set number of dives and many warranties depend on it. A regulator is life-support equipment, so service belongs with a factory-trained technician rather than being attempted at home. Have it looked at sooner than scheduled if you notice increased breathing effort, free-flow, bubbles, or water in the second stage.
How do I rinse and care for a regulator after diving?
Make sure the dust cap is dry and firmly seated over the first-stage inlet before the regulator goes anywhere near water, because water inside the first stage is the leading cause of internal corrosion. Rinse in fresh water without pressing the purge button, since purging while depressurized can draw water back into the second stage. Shake out the water and hang it to dry with the hoses in wide, gentle loops rather than tight bends.
Can I fly with a scuba regulator?
Regulators travel well and are usually best carried in hand luggage where they will not be crushed or lost. A regulator holds no gas of its own, so there is nothing inherently problematic about it on an aircraft, though the airline and security screeners always have the final say. Pack it dry with the dust cap in place, in a padded regulator bag or wrapped in soft gear.
Can I use my regulator with nitrox?
Many modern regulators are supplied as suitable for nitrox mixes up to 40 percent oxygen, which is the widely used recreational industry standard, while anything above that requires dedicated oxygen-clean equipment and procedures. Confirm what your specific regulator's manual states, and follow your nitrox training and your fill station's requirements. Never assume a regulator is oxygen-service clean simply because it looks clean or is new.
What is the difference between DIN and yoke regulators?
A yoke (A-clamp) fitting clamps over the tank valve and is the most common connection across much of the recreational world, while a DIN fitting screws into the valve and is standard in much of Europe and in technical diving. DIN captures the o-ring inside the threads, which many divers consider more secure, but yoke is often what rental cylinders provide. Adapters exist in both directions, so check what is used where you dive before deciding.
What is the octopus regulator for?
The octopus is your backup second stage, carried so you can share air with a buddy who is out of gas, or breathe from it yourself if your primary fails or free-flows. It is normally on a longer, brightly colored hose so it is easy to find and hand over under stress. Secure it in the triangle between your chin and the bottom of your rib cage so it is instantly accessible and not dragging through sand or coral.
How should I store a regulator between dive trips?
Store it fully dry, out of sunlight, with the dust cap in place and the hoses in wide loops rather than tightly coiled. Avoid hanging it by the second stages for long periods, which stresses the hose fittings; laying it flat in a padded bag or hanging it by the first stage is kinder. If it has sat unused for a long stretch, have it checked before your next trip rather than assuming it is ready to dive.






