| YOUR SIZE | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| FOREHEAD | 21 in | 21.5 in | 22.5 in | 23.5 in | 24 in | 24.5 in |
| NECK | 13 in | 14 in | 15 in | 16 in | 17 in | 18 in |
You May Need These
Description
Description
Features
Features
BARE's Highest Performance Hood that Set- the-Standard for Comfort and Sealing. All Exterior Seams are Sealed with BARE's SEAMTEK Liquid Seam Tape and incorporate BARE's Sealtek Ring Seal System designed to work together to Reduce-or-Eliminate Water Penetration and Improve Diver Comfort and Warmth. Hood has 7mm ELASTEK Full-Stretch Neoprene for Ultimate-Stretch and Comfort and 5mm ELASTEK/GLIDESKIN-IN with Trim-Able Face and Neck Seal that Glides Nicely Over-your-Hair. SEAMTEK Exterior Seam Protection Reduces Water Penetration at the Seams keeping your Head Warm and Dry. Hood incorporates BARE's Sealtek Ring Seal System for Maximum Water Sealant Performance when used with a Dry Suit. Hood is Vented to allow Trapped-Air to Escape Preventing Ballooning and Water Exchange. The Hoods Neck Seal Mates with Wetsuit Seal/Collar and a Mask Strap Grip Pad on the back of the Hood Secures-your-Mask Strap in place. All Seams are Double-Glued and Blind Stitched with SECURE-LOCK Construction Improves Isolation and Reduces Flushing keeping you Warmer and Diving-Longer. This Black Hood is available in Multiple Sizes and is covered by a is covered by a 24 month limited warranty.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Frequently Asked Questions
What thickness of dive boots, gloves, or hood should I choose?
As a general rule, thicker neoprene insulates more, so colder water pushes you toward thicker accessories, but fit, dive length, and personal cold tolerance matter as much as the millimeter number. Divers commonly lose a great deal of heat through the head, so a hood is often the highest-value warmth upgrade for the money. Remember that every added piece of neoprene also adds buoyancy you will need to account for.
How should dive boots fit?
Boots should fit like a snug athletic shoe, with no heel lift and no crushed toes; a little water inside is normal, a sloshing pocket is not. Try them on with the socks you would actually dive, and remember your fin foot pocket has to accommodate the boot. Hard-sole boots protect on rocky shore entries, while soft-sole boots are lighter and pack smaller for boat and travel diving.
How should dive gloves fit?
Gloves should be snug across the palm with fingertips reaching the ends without bunching, since trapped air and loose fingertips destroy dexterity. Thicker gloves are warmer but make buckles, clips, and inflator buttons harder to operate, so choose the thinnest glove that keeps you comfortable in your conditions. Try working a clip or buckle while wearing them before you commit.
How should a dive hood fit?
A hood should seal around the face and neck without restricting your throat or jaw, and lie flat on your head without pulling the mask strap out of position. A loose hood flushes cold water continuously, while an overly tight one is distracting and uncomfortable. Many hoods have a vent to release air trapped during descent, so check yours and burp out any trapped air before you go down.
Why does new neoprene feel so tight?
New neoprene compresses and relaxes with use, so a boot, glove, or hood that feels firm out of the packaging usually settles slightly after a few dives. It should still be snug afterward rather than loose, because neoprene that stretches into a loose fit was probably oversized to begin with. Buy for a snug fit when new, but never for a fit that restricts circulation or breathing.
Do I need to change my weighting when I add a hood, gloves, and boots?
Yes, because every piece of neoprene you add is buoyancy, and a hood, boots, and thick gloves together can shift your weighting noticeably. Do a proper buoyancy check any time you change your exposure protection rather than assuming your usual weight still works. The weight-check procedure is covered in your training, and a dive professional can help you re-do it.
How do I care for dive boots, gloves, and hoods?
Rinse them inside and out in fresh water after every dive day, since they hold sweat and salt more than any other gear, and dry them fully inside-out before packing. Dry them out of direct sunlight and never on a heater, because heat hardens neoprene and weakens glued seams. Store them dry and unfolded, as damp neoprene sealed in a bag is how gear picks up a permanent smell.
